Another oilpressure fluctuation problem.

I plan on restricting oil to top first. Most likely with some restrictor pushrods. I am going to check to to see just how much oil is going to top with a drill turning pump. I pulled apart the filter and it was clean. I guess when it takes alot of yrs to build something your overly worried about it blowing up so its hard tolnow if your overreacting. I was just sure someone went through the same thing and trying to figure out without spending extra $ and time. I would only have me to blame if it blows. By the way its more of a self pride thing then bragging rights. Heck I am running 93 octane on a small stroker so et wasnt the go. Thanks for everyones help.., ED

Thanks to a good member here he has help me get it to hold pressure by adding a quart and a half of oil. Thats about how much is other places. I am going to try to get a better solution this winter, thanks for all your help ED