Winter Tech Seminar 2010

Post new topic   Reply to topic

Page 3 of 8 Previous  1, 2, 3, 4, 5, 6, 7, 8  Next

View previous topic View next topic Go down

Re: Winter Tech Seminar 2010

Post  ThndrChkn on October 4th 2009, 1:22 am

I hope you guys have as much fun as we did last year, as I shant be there this year...







Doug... Cool

_________________
'86 F150......
521 w/FRPP SCJ heads, Glide, & 5500 UCC Converter...

Best ET: 1/8: 6.34 @ 112 mph N/A @ 5000' 6.17 @ 112 mph N/A @ 1200'

Best ET: 1/4: 9.97 @ 135 mph N/A @ 5000' 9.73 @ 136 mph N/A @ 1200'

Don't be a hater, 'cause my truck's faster than your car....!
Heck! I think it's cooler than your car....! LOL!

ThndrChkn

Posts: 1071
Join date: 2008-12-04
Age: 43
Location: Helena, Montana

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  Nevs on October 4th 2009, 9:26 am

1bad521 wrote:I hope you guys have as much fun as we did last year, as I shant be there this year...

Are you sure about that?







Doug... Cool

_________________
Perception is reality
Failure is not an option
Never forgive, never forget
Fight the power! B2FBACIP

Nevs
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts: 1752
Join date: 2009-02-08
Age: 56
Location: NW Iowa(Odebolt)

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  ThndrChkn on October 4th 2009, 10:59 am

Fairly... I got lucky last year... I can't ask for the same luck everytime one of these comes up, if ya know what I mean... Embarassed Wink









Doug... Cool

_________________
'86 F150......
521 w/FRPP SCJ heads, Glide, & 5500 UCC Converter...

Best ET: 1/8: 6.34 @ 112 mph N/A @ 5000' 6.17 @ 112 mph N/A @ 1200'

Best ET: 1/4: 9.97 @ 135 mph N/A @ 5000' 9.73 @ 136 mph N/A @ 1200'

Don't be a hater, 'cause my truck's faster than your car....!
Heck! I think it's cooler than your car....! LOL!

ThndrChkn

Posts: 1071
Join date: 2008-12-04
Age: 43
Location: Helena, Montana

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  jsracing on October 6th 2009, 1:35 pm

Do we need to pre register? send in funds etc? Several of us from Indy might taxi over together.

jsracing

Posts: 132
Join date: 2009-06-28
Location: Indy 2 miles from the US nationals

View user profile http://indyracingscene.com/?styleid=2

Back to top Go down

Re: Winter Tech Seminar 2010

Post  Nevs on October 6th 2009, 1:49 pm

jsracing wrote:Do we need to pre register? send in funds etc? Several of us from Indy might taxi over together.


If it's like this year, you just register at the door.

_________________
Perception is reality
Failure is not an option
Never forgive, never forget
Fight the power! B2FBACIP

Nevs
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts: 1752
Join date: 2009-02-08
Age: 56
Location: NW Iowa(Odebolt)

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  bosshoss on October 6th 2009, 9:22 pm

Looking in to booking flights etc...

Can anyone confirm this is a one day event...

Any idea what time it would end...

Need to know asap so I can get my flights booked.

dkp

bosshoss

Posts: 92
Join date: 2009-08-10

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  IDT-572 on October 9th 2009, 1:59 pm

Bump for Cody L.

HERE YA GO BIG GUY................. Cool

_________________
__________________
Blake



Soon to be P-51 headed

86 Notch Mustang
557 TFS Streets 14:1 comp
2965 lb.
29.5x13.5 Ladder Bar
1.26 60ft 5.67 @ 124.67 9.06 @ 147.84


[/img]

IDT-572

Posts: 1058
Join date: 2008-12-02
Age: 49
Location: Shelbyville Tn.

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  D. Sea on October 9th 2009, 2:01 pm

bosshoss wrote:Looking in to booking flights etc...

Can anyone confirm this is a one day event...

Any idea what time it would end...

Need to know asap so I can get my flights booked.

dkp


Friday is greet and meet, Saturday will be the tech seminar, Saturday night THROW DOWN and don't pass out at the bar Razz Sunday drive home.

_________________
Damon Sea
83 Mustang
534 CI

"If it doesn't fit, Force it. If it breaks then it needed to be replaced anyway"

Thanks to my sponsors who support my race team

Performance Crankshaft www.performancecrankshaft.com
BMR performance aka Bill Mitchell http://s254.photobucket.com/albums/hh93/85monte_ss/
Evans Racing Engines www.evansracingengines.com
BF Evans Ford www.bfevansraceparts.com

D. Sea

Posts: 1424
Join date: 2008-12-02
Age: 41
Location: Shelbyville, KY

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  bluef100fe on October 9th 2009, 2:30 pm

Looks like we will have to make another road trip. Maybe I can rope my dad and brother into coming with. Would be a long trip alone and with no big block to ward off boredom Smile Hope to be able to meet everyone again and put some more names with faces.

_________________
Cody Ladowski
76' F-100 Stepside 390 FE
Pump Gas Street Truck
Best 7.91 @ 86.9 and 12.52 @ 106.6
PRO Runner-Up @ BBF BASH 2009 & 2010

bluef100fe

Posts: 59
Join date: 2009-09-09
Age: 26
Location: Pulaski, Wisconsin

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  jones on October 13th 2009, 12:43 pm

That's a much better date for me, I just might be able to make it this year!

jones
Moderator
Moderator

Posts: 985
Join date: 2008-12-02
Location: Philadelphia, MS.

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  c.evans on October 13th 2009, 6:59 pm

Hey guys,

I spent the better part of the day Monday at Rose-Hulman Institute of Technology (aka University) firming up our plans. It will be Saturday Jan 16, 2010 and it starts at 8:00 central time/9:00 eastern time. This is a firm date! It will be held in Hatfield Hall, which is the first building on the right when you enter the main entrance to the campus. You will see signs directing you.

Terre Haute, IN is one hour west of Indy on I-70. There are two exits into town, exit 4 and exit 11. Take exit 11 on to state Hwy 46, and go north on it about 4 miles until it "T"s into U.S. Hwy 40. Turn right (east) on to U.S. Hwy 40 and go about one block and take the first driveway on your left, which is the main entrance to the campus. Look over to your right and go to that building which is Hatfield Hall. This auditorium seats about 1500 people.

For those of you flying in. Craig Sullivan suggested flying in to Weir-Cook Airport at Indy, which is on the west side of Indy, and then getting a rental car and driving one hour west to Terre Haute. That's probally the best suggestion, however do be advised that Terre Haute has a small airport, Hulman Field, and it does have commuter flights I think.

Meanwhile, back to exit 4. This is the exit where I-70 crosses U.S. Hwy 41. The Texas Roadhouse is at this exit wnd we will meet there Friday night for our get together meal, pretty much the same as last year. The Texas Roadhouse is at the corner of Margaret Ave. and U.S. Hwy 41, just right there at exit 4.

Darin Morgan has agreed to be one of our guest speakers and he will talk about cylinder heads. He has also said he'll have a new fully machined NHRA FORD Pro Stock head there on display.

I am still working on our host hotel and the special room rates.

We will have college engineering students from both Rose-Hulman and Indiana State University there in attendence with us hard core racers, so I'm asking that we be professional, which I know we will.

We're charging $20 per person this year, which I know is double what we charged last year, however we're are providing lunch, which will be there in the campus cafeteria. The meal will be smorgasbord style and you can choose whatever you want to eat. I ate lunch there Monday and they had very good food.

I would like for us to pre-register, (but I still need to set that up with President Damon Sea) in order to get a head count on how many people the food service will need to provide meals for.

Thanks,


Charlie Evans

c.evans

Posts: 652
Join date: 2008-12-04

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  Nevs on October 13th 2009, 7:04 pm

c.evans wrote:Hey guys,

I spent the better part of the day Monday at Rose-Hulman Institute of Technology (aka University) firming up our plans. It will be Saturday Jan 16, 2010 and it starts at 8:00 central time/9:00 eastern time. This is a firm date! It will be held in Hatfield Hall, which is the first building on the right when you enter the main entrance to the campus. You will see signs directing you.

Terre Haute, IN is one hour west of Indy on I-70. There are two exits into town, exit 4 and exit 11. Take exit 11 on to state Hwy 46, and go north on it about 4 miles until it "T"s into U.S. Hwy 40. Turn right (east) on to U.S. Hwy 40 and go about one block and take the first driveway on your left, which is the main entrance to the campus. Look over to your right and go to that building which is Hatfield Hall. This auditorium seats about 1500 people.

For those of you flying in. Craig Sullivan suggested flying in to Weir-Cook Airport at Indy, which is on the west side of Indy, and then getting a rental car and driving one hour west to Terre Haute. That's probally the best suggestion, however do be advised that Terre Haute has a small airport, Hulman Field, and it does have commuter flights I think.

Meanwhile, back to exit 4. This is the exit where I-70 crosses U.S. Hwy 41. The Texas Roadhouse is at this exit wnd we will meet there Friday night for our get together meal, pretty much the same as last year. The Texas Roadhouse is at the corner of Margaret Ave. and U.S. Hwy 41, just right there at exit 4.

Darin Morgan has agreed to be one of our guest speakers and he will talk about cylinder heads. He has also said he'll have a new fully machined NHRA FORD Pro Stock head there on display.

I am still working on our host hotel and the special room rates.

We will have college engineering students from both Rose-Hulman and Indiana State University there in attendence with us hard core racers, so I'm asking that we be professional, which I know we will.

We're charging $20 per person this year, which I know is double what we charged last year, however we're are providing lunch, which will be there in the campus cafeteria. The meal will be smorgasbord style and you can choose whatever you want to eat. I ate lunch there Monday and they had very good food.

I would like for us to pre-register, (but I still need to set that up with President Damon Sea) in order to get a head count on how many people the food service will need to provide meals for.

Thanks,


Charlie Evans


I'm ready to preregister when Damon is ready to take them. Thanks for doing it Charlie!

_________________
Perception is reality
Failure is not an option
Never forgive, never forget
Fight the power! B2FBACIP

Nevs
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts: 1752
Join date: 2009-02-08
Age: 56
Location: NW Iowa(Odebolt)

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  jsracing on October 14th 2009, 10:35 am

I copied Charlie's post and put it on my forum @ Indy racing scene, we have a few folks that that might like to check it out.

Who else is lined up to speak?

JS

jsracing

Posts: 132
Join date: 2009-06-28
Location: Indy 2 miles from the US nationals

View user profile http://indyracingscene.com/?styleid=2

Back to top Go down

Re: Winter Tech Seminar 2010

Post  D. Sea on October 15th 2009, 10:59 am

Sounds good Charlie, I'll send a message out to everyone on the BBF Registry.

Thanks

_________________
Damon Sea
83 Mustang
534 CI

"If it doesn't fit, Force it. If it breaks then it needed to be replaced anyway"

Thanks to my sponsors who support my race team

Performance Crankshaft www.performancecrankshaft.com
BMR performance aka Bill Mitchell http://s254.photobucket.com/albums/hh93/85monte_ss/
Evans Racing Engines www.evansracingengines.com
BF Evans Ford www.bfevansraceparts.com

D. Sea

Posts: 1424
Join date: 2008-12-02
Age: 41
Location: Shelbyville, KY

View user profile

Back to top Go down

Re: Winter Tech Seminar 2010

Post  D. Sea on October 19th 2009, 2:08 pm

Nevs...

Please edit the first post and add this, so it's on the first page. I'm about to send out the same information to all you guys on my BBF Registry.

Thanks!

2010 Evans Racing Engines Winter Tech Seminar. All gear heads and even non-gear heads are welcome!

As before, an all star group of guest speakers will be on hand to answer any and all questions before and after their presentation along with various vendor displays. I will video the tech seminar for those that can not make the trip; DVDs will be available ASAP. I’ll have other DVDs with me if you want to pick up a copy while you are there i.e. The previous tech seminars and BBF Bash DVDs.

I’ve created a spreadsheet in order to track the number of attendees. So this is what I need from you guys. If you will be attending the 2010 Evans Racing Engines Winter Tech Seminar, please let me know your name, how many people will be attending in your group, including yourself. What’s your screen name and will you be paying at the Seminar or Pre-Register in advance. We need a fairly accurate number in order to guesstimate the number of folks that will be eating lunch in the cafeteria on Saturday.

Pre-Registration funds ($20 each person) can be sent to my paypal address or mailed to my home address. BE SURE to list in the subject line “2010 Evans Racing Engines Winter Tech Seminar” or something like that because I’m also receiving funds for other items like the Chuckathon (Help Chuck rebuild his car). Speaking of the Chuckathon, some of you guys are donating parts to Chuck’s rebuild and you can bring them to the Tech Seminar if applicable, save on shipping etc…

Please contact me via e-mail or PM for My Paypal address and My home address






Quoted from Charlie on the BBF Forum…

Hey guys,

I spent the better part of the day Monday at Rose-Hulman Institute of Technology (aka University) firming up our plans. It will be Saturday Jan 16, 2010 and it starts at 8:00 central time/9:00 Eastern Time. This is a firm date! It will be held in Hatfield Hall, which is the first building on the right when you enter the main entrance to the campus. You will see signs directing you.

Terre Haute, IN is one hour west of Indy on I-70. There are two exits into town, exit 4 and exit 11. Take exit 11 on to state Hwy 46, and go north on it about 4 miles until it "T"s into U.S. Hwy 40. Turn right (east) on to U.S. Hwy 40 and go about one block and take the first driveway on your left, which is the main entrance to the campus. Look over to your right and go to that building which is Hatfield Hall. This auditorium seats about 1500 people.

For those of you flying in. Craig Sullivan suggested flying in to Weir-Cook Airport at Indy, which is on the west side of Indy, and then getting a rental car and driving one hour west to Terre Haute. That's probably the best suggestion, however do be advised that Terre Haute has a small airport, Hulman Field, and it does have commuter flights I think.

Meanwhile, back to exit 4. This is the exit where I-70 crosses U.S. Hwy 41. The Texas Roadhouse is at this exit and we will meet there Friday night for our get together meal, pretty much the same as last year. The Texas Roadhouse is at the corner of Margaret Ave. and U.S. Hwy 41, just right there at exit 4.

Darin Morgan has agreed to be one of our guest speakers and he will talk about cylinder heads. He has also said he'll have a new fully machined NHRA FORD Pro Stock head there on display.

I am still working on our host hotel and the special room rates.

We will have college engineering students from both Rose-Hulman and Indiana State University there in attendance with us hard core racers, so I'm asking that we be professional, which I know we will.

We're charging $20 per person this year, which I know is double what we charged last year, however we're are providing lunch, which will be there in the campus cafeteria. The meal will be smorgasbord style and you can choose whatever you want to eat. I ate lunch there Monday and they had very good food.

I would like for us to pre-register, (but I still need to set that up with President Damon Sea) in order to get a head count on how many people the food service will need to provide meals for.

Thanks,


Charlie Evans

_________________
Damon Sea
83 Mustang
534 CI

"If it doesn't fit, Force it. If it breaks then it needed to be replaced anyway"

Thanks to my sponsors who support my race team

Performance Crankshaft www.performancecrankshaft.com
BMR performance aka Bill Mitchell http://s254.photobucket.com/albums/hh93/85monte_ss/
Evans Racing Engines www.evansracingengines.com
BF Evans Ford www.bfevansraceparts.com

D. Sea

Posts: 1424
Join date: 2008-12-02
Age: 41
Location: Shelbyville, KY

View user profile

Back to top Go down

Page 3 of 8 Previous  1, 2, 3, 4, 5, 6, 7, 8  Next

View previous topic View next topic Back to top


Post new topic   Reply to topic
Permissions of this forum:
You cannot reply to topics in this forum