Statistics We have 5964 registered usersThe newest registered user is Pops429 Our users have posted a total of 318276 messages in 28569 subjects | 521 Stroker Kit $450 May 16th 2017, 10:52 pm by bbfguy1 Eagle cast 4.300 crankshaft std.mains/std.rods (Externally balanced) RPM 6.700 rods, bushed with 7/16 ARP 8740 Keith Black (KB403) Hyper eutectic pistons .030 (Hastings rings still on pistons) Scat External balance SFI flex plate Ford D9TE external weight (fits behind balancer for external balanced assembly) These parts were used in a test stand (mule) engine with only cam break in time on them and some carb tuning time. Parts have never actually been in a car, except for the flex plate. There are approximately 3-4 hours of total run time on parts. These parts were used in a block, that was previously already .030 over. The #2 cylinder had about .001 more clearance that was needed, so only #2 piston skirt was knurled, to get the clearance needed. All other cylinders were fine with clearance. Unable to post pics. but have them to send. Message with any questions. Comments: 8 | Latest topics Who is online? In total there are 246 users online :: 1 Registered, 0 Hidden and 245 Guests :: 3 Botsdfree383 Most users ever online was 790 on December 5th 2023, 3:44 pm |
|
|
Yesterday at 11:17 pm by Mark Miller
» pressure regulator
March 26th 2024, 10:29 am by maverick172
» DANA 609
March 26th 2024, 1:23 am by 427John
» Another guess the Hp thread
March 25th 2024, 11:15 pm by The Mad Porter
» Greenbean - The 98GT - turbo 460 swap
March 25th 2024, 8:51 pm by BigBlockRanger
» Blessed to be alive!
March 25th 2024, 8:07 pm by FordPriest
» pro bracket radials
March 25th 2024, 7:21 pm by FordPriest
» Jon Kaase SR71 Cylinder Heads
March 25th 2024, 7:17 pm by FordPriest
» Comp cams lifters and springs
March 25th 2024, 4:30 pm by 9seccomet