My Bullitt Beast

Oh yea they are going. I just got those to use until I have the money to get this...

http://www.summitracing.com/parts/SUM-G3106-1/?rtype=10

I had measured and trimed for the hood to lift off hood around the scoop. Here is a pic of my hood......

http://i970.photobucket.com/albums/ae189/TennesseeBullitt/P1000319.jpg

Yea I know I have a huge hole in it, I rather see motor instead .

dude, dont put that fake injector deal on there lol.

Get an old school Hilborn deal, or have an alum one fabbed up...............old mailbox....anything but the fake 3 hole injector hat.

I like the hilborn style too, what is so bad about the scoop deal? Are they just a deal like the main gridles, just a waste of money? I will admit they do look like a PITA to setup.

Those things are just hokey, you see the highschool kids running around with stuff like that.

What are you doing with the hydroboost? You gonna run it?

richter69 wrote:Those things are just hokey, you see the highschool kids running around with stuff like that.

Ditto... back when I was the kid just outta high school a guy I worked with gave me his at the point he realized this..

...But I never used it

Yea I am going to run the hydroboost, I have aerospace drag brakes up front and in the back, It all works good.
Don't kill me but the valve covers are pro comps... Those were the only plain aluminum ones I could find to paint. They are 4 1/2 in tall and they clear the hydrobooster.

Tennessee Bullitt wrote:Don't kill me but the valve covers are pro comps... Those were the only plain aluminum ones I could find to paint.

as long as its just valve covers i think it can be overlooked

Well I have been working on and alternator bracket, got it done and now I got my d&d headders I am fitting in the car. 2 1/8 is no joke with a factory k-member. I took the headders and cut them to bolt the tubes on one at a time. I also found some serpentine pulleys off a 460 truck I am using. Have to put some clamps on today and I will be able to give some good detailed pics of the motor tonight. I hate having a delay, but I also love the challenge to be able to build things with my bare hands.

Good Luck keep us posted.

Those of us whom are Ovaless are envious.

richter69 wrote:Those things are just hokey, you see the highschool kids running around with stuff like that.

sell the intake and carbs to a boat/bling guy, and get a victor/1000 cfm setup with a fiberglass cowl.... please. you have worked to hard to go out like that.

Well got a little more finished. I can't believe for a week I was checking all the engine dynos to see if I could get on it. Go figure I need a bell for them to use. I set my lash, checked all bolts and double checked again. So it is going in the car this weekend and I am going to start it and get this thing going. Atleast we have a chaissy dyno here. I am going to put a good conservative tune on it and drive it around to break it in. All I need is my built tranny back to be complete. Here is some more pics of the complete motor. I am going to stick it in the car starting tomorrow. If weather is nice I will get full pics of everthing to see.

http://i970.photobucket.com/albums/ae189/TennesseeBullitt/car/P1000352.jpg

http://i970.photobucket.com/albums/ae189/TennesseeBullitt/car/P1000355.jpg

http://i970.photobucket.com/albums/ae189/TennesseeBullitt/car/P1000351.jpg

I also found these to replace my fender emblems, I thought these were pretty cool....



http://www.blueovaltruckparts.com/p-1896-powered-by-429-scj-valve-cover-decal-pr.aspx