BIG BLOCK FORD

BIG BLOCK FORD TECHNICAL AND PARTS SITE

OAKLEY MOTORSPORTS .COM * ENGINES * CARBS * TIRES * VP FUELS * 270-929-5185

pro 64

BIG BLOCK FORD :: GENERAL TECH :: ENGINE TECH

View previous topic View next topic Go down

pro 64

Post  pro64 on December 3rd 2011, 9:38 am

looking for input on a 502 stroker 1050 dominator victor intake comp mech roller 670 lift 254 260 duration 10 to 1 compression ,kaase p51 heads out of box msd distributer. take guess on hp n torque...... affraid

pro64

Posts: 19
Join date: 2011-12-03

View user profile

Back to top Go down

Re: pro 64

Post  bruno on December 3rd 2011, 10:06 am

first off welcome to the site , and if i were to take a guess it would have to be between 680-720 hp


Last edited by bruno on December 3rd 2011, 10:37 am; edited 1 time in total

_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD

bruno
Moderator
Moderator

Posts: 7784
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL.

View user profile http://WWW.CKRME.COM

Back to top Go down

Re: pro 64

Post  pro64 on December 3rd 2011, 10:15 am

hey bruno thank u for welcome apreciate that . and ur numbers r about wat im hoping Cool

pro64

Posts: 19
Join date: 2011-12-03

View user profile

Back to top Go down

Re: pro 64

Post  bruno on December 3rd 2011, 10:37 am

pro64 wrote:hey bruno thank u for welcome apreciate that . and ur numbers r about wat im hoping Cool


no problem , hopefully others will chime in .......

_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD

bruno
Moderator
Moderator

Posts: 7784
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL.

View user profile http://WWW.CKRME.COM

Back to top Go down

Re: pro 64

Post  the Coug on December 3rd 2011, 11:00 am

19068.5 hp These threads are useless you have to take it to the dyno to find what it will do you are going to be lucky to do 600, really small cam for wanting more

the Coug

Posts: 2224
Join date: 2008-12-02

View user profile

Back to top Go down

Re: pro 64

Post  John Myrick on December 3rd 2011, 11:08 am

I'm going to say 600 also, cam is smaller than mine, compression is a tad lower, I have the Mafia but you have P51's and mine is SCJ's
mine made 700@6000

John Myrick

Posts: 450
Join date: 2011-02-05
Age: 49
Location: Maryland

View user profile

Back to top Go down

Re: pro 64

Post  bruno on December 3rd 2011, 12:10 pm

my bad miss the smallish cam part ..... told you others will chime in

_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD

bruno
Moderator
Moderator

Posts: 7784
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL.

View user profile http://WWW.CKRME.COM

Back to top Go down

Re: pro 64

Post  Curt on December 3rd 2011, 12:13 pm

bruno wrote:my bad miss the smallish cam part ..... told you others will chime in


Not to mention the 10 to 1 compression ratio. Rolling Eyes

Curt

Posts: 1680
Join date: 2009-02-08
Age: 49
Location: Henrietta, Texas but mostly on the road

View user profile

Back to top Go down

Re: pro 64

Post  John Myrick on December 3rd 2011, 1:32 pm

Curt wrote:
bruno wrote:my bad miss the smallish cam part ..... told you others will chime in


Not to mention the 10 to 1 compression ratio. Rolling Eyes


And depending on the overlap of the cam, it might be lower than that

John Myrick

Posts: 450
Join date: 2011-02-05
Age: 49
Location: Maryland

View user profile

Back to top Go down

Re: pro 64

Post  pro64 on December 3rd 2011, 1:48 pm

guessing always fun scheduled for the dyno first uv spring lol!

pro64

Posts: 19
Join date: 2011-12-03

View user profile

Back to top Go down

View previous topic View next topic Back to top

BIG BLOCK FORD :: GENERAL TECH :: ENGINE TECH

Permissions in this forum:
You cannot reply to topics in this forum