BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

P/W clearance SRP pistons

2 posters

Go down

P/W clearance SRP pistons Empty P/W clearance SRP pistons

Post  Rmk Boss9 January 24th 2014, 1:09 pm

502 Scat stroker kit, will see maybe 6200-6300 rpm.
The paper work says .003-.0035. I will not be using any power adders
and its going in a 3700lbs. car and will street driven 95% of the time.
I may do a couple races a year. Apparently the 4032 pistons can run tighter
clearances than the other forged JE pistons.

Randy

Rmk Boss9

Posts : 19
Join date : 2013-12-03

Back to top Go down

P/W clearance SRP pistons Empty Re: P/W clearance SRP pistons

Post  rmcomprandy January 24th 2014, 5:24 pm

Rmk Boss9 wrote:502 Scat stroker kit, will see maybe 6200-6300 rpm.
The paper work says .003-.0035. I will not be using any power adders
and its going in a 3700lbs. car and will street driven 95% of the time.
I may do a couple races a year. Apparently the 4032 pistons can run tighter
clearances than the other forged JE pistons.

Randy

.0035" should be fine with 4032 alloy.
... and the hotter the water normally runs, the less the clearance can be. Cold water like in a marine situation needs more clearance.

rmcomprandy

Posts : 6095
Join date : 2008-12-02
Location : Roseville, Michigan

http://www.rmcompetition.com

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum