bb ford

Go down

bb ford

Post  cesarperez on May 26th 2013, 2:11 pm

what is the largest crank that can be put on a bb ford

cesarperez

Posts : 19
Join date : 2012-08-08

View user profile

Back to top Go down

Re: bb ford

Post  bbf-falcon on May 26th 2013, 4:36 pm

depends on which block and w/wo using a die grinder.

bbf-falcon

Posts : 8992
Join date : 2008-12-03
Location : Jackson, Ohio

View user profile

Back to top Go down

Re: bb ford

Post  schmitty on May 27th 2013, 8:00 am

4.75" will fit any block.
avatar
schmitty

Posts : 4538
Join date : 2008-12-02
Age : 48
Location : Holdrege, NE

View user profile

Back to top Go down

Re: bb ford

Post  Wheelie58 on May 27th 2013, 10:30 am

ESI currently has a customer running a 5.35 stroke in an Eliminator block. Lots of surgery was required along with deck plates and 8 sleeves.
Runs very hard...on season#2.
Oh...it has aluminum rods too..
Not much pan rail left. Cool
Keith
avatar
Wheelie58

Posts : 1840
Join date : 2009-08-08
Location : Alpharetta, GA

View user profile http://www.keithfulpmotorsports.com

Back to top Go down

crank

Post  cesarperez on May 27th 2013, 4:16 pm

stock block

cesarperez

Posts : 19
Join date : 2012-08-08

View user profile

Back to top Go down

Re: bb ford

Post  dfree383 on May 27th 2013, 10:52 pm

4.500 is the biggest inexpensive forged one, some times you cam get 4.600 if you call. Anything bigger is going to be billet and expensive.

You probably better spending the extra money on an aftermarket block rather than something over 4.6 stroke.
avatar
dfree383
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 14120
Join date : 2009-07-09
Location : Home Wif Da Wife.....

View user profile

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum