Engines For Sale SOLD
Page 1 of 3 • 1, 2, 3
Engines For Sale SOLD
Looking to skinny down my engine collection, Have a 598 going in my dragster and a 572 going together for the mustang and just don't have the space for these.
Project Training Wheels 466"
D1 Block .030 machined and preped by Jet Boat Bob
Arias Domed Pistons (14:1)
10/10 3.85 Stroke Crank
Scat Hbeam Rods 6.605
Charlies Chassis pan and Kaase Pump
Custom Cam Research Soild Roller and Comp Eliete Lifters .800+ Lift
Trend 3/8 .135 wall pushrods
Comp 1.73 SS Rockers
ATI Balancer
Ford Racing Billet Double Roller
Fully Ported Edelbrock RPM heads (flowed 390 @ .800)
Ford Racing 2.25 / 1.76 valves
Manley Nextek Valve Springs and TI Retainers
Modified Weiand TR with 2x 8896 1050 dominators and Linkage
Mallory Crank Trigger Distributor and MSD Trigger & FMS Wires
Mososo Valve Covers
Does not Include Water Pump, Flex Plate.
Engine made 800hp on Mike Phillips Dyno, Only dyno time and one run on engine.
Link to the build thread http://www.429-460.com/t12638p30-yet-another-460-build
$8500 W/O TR intake and Carbs (Intake Sold)..... Comes with a 4500 Victor Intake.

Engine is Located in Paola, KS
Project Training Wheels 466"
D1 Block .030 machined and preped by Jet Boat Bob
Arias Domed Pistons (14:1)
10/10 3.85 Stroke Crank
Scat Hbeam Rods 6.605
Charlies Chassis pan and Kaase Pump
Custom Cam Research Soild Roller and Comp Eliete Lifters .800+ Lift
Trend 3/8 .135 wall pushrods
Comp 1.73 SS Rockers
ATI Balancer
Ford Racing Billet Double Roller
Fully Ported Edelbrock RPM heads (flowed 390 @ .800)
Ford Racing 2.25 / 1.76 valves
Manley Nextek Valve Springs and TI Retainers
Modified Weiand TR with 2x 8896 1050 dominators and Linkage
Mallory Crank Trigger Distributor and MSD Trigger & FMS Wires
Mososo Valve Covers
Does not Include Water Pump, Flex Plate.
Engine made 800hp on Mike Phillips Dyno, Only dyno time and one run on engine.
Link to the build thread http://www.429-460.com/t12638p30-yet-another-460-build
$8500 W/O TR intake and Carbs (Intake Sold)..... Comes with a 4500 Victor Intake.

Engine is Located in Paola, KS
Last edited by dfree383 on April 24th 2018, 9:22 am; edited 11 times in total
dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
It has about 25 passes on it and I'd take $1,500 for it with the engine.
Last edited by dfree383 on November 30th 2015, 6:50 pm; edited 1 time in total
dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
Dave C. wrote:Good numbers on those RPM'S .
Yes they work very well, Flowed them on Raceheads SF600 bench in CA and Mike SF600 Bench in KY.
dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
Looks like Mike is callin for backup in that 1st picture.

BradB- Posts : 41
Join date : 2009-09-06
Curt- Posts : 2674
Join date : 2009-02-08
Age : 56
Location : Henrietta, Texas but mostly on the road
Re: Engines For Sale SOLD
What did you ever do with that Semi Hemi??
jasonf- BBF CONTRIBUTOR
- Posts : 2865
Join date : 2009-07-14
Age : 49
Location : Lafayette, LA
Re: Engines For Sale SOLD
its sitting in storagejasonf wrote:What did you ever do with that Semi Hemi??
dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
dfree383 wrote:its sitting in storagejasonf wrote:What did you ever do with that Semi Hemi??
Well what good is that?

jasonf- BBF CONTRIBUTOR
- Posts : 2865
Join date : 2009-07-14
Age : 49
Location : Lafayette, LA
Re: Engines For Sale SOLD
if you think you need it make me an offer I can't refuse!jasonf wrote:dfree383 wrote:its sitting in storagejasonf wrote:What did you ever do with that Semi Hemi??
Well what good is that?![]()

dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
No Reasonable Offers Refused......

dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
651 bucks
richter69- Posts : 13645
Join date : 2008-12-02
Age : 48
Location : In the winners circle
Re: Engines For Sale SOLD
How much is a Buck in Okie land?richter69 wrote:651 bucks

dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
You'er the one up late.....Dave C. wrote:Go to bed

dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
Need A "0" on the end (and no decimal places.......
)

dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
You are always trying to get someones O in the end....dfree383 wrote:Need A "0" on the end (and no decimal places.......)
kjett- Posts : 1137
Join date : 2009-09-15
Location : Virginia
Re: Engines For Sale SOLD
Ok, $0652, but I don't see how that makes much of a difference.dfree383 wrote:Need A "0" on the end (and no decimal places.......)

schmitty- Posts : 4538
Join date : 2008-12-02
Age : 48
Location : Holdrege, NE
Re: Engines For Sale SOLD
Thats not the End..... Thats the Beginning..... Smart Ass.....schmitty wrote:Ok, $0652, but I don't see how that makes much of a difference.dfree383 wrote:Need A "0" on the end (and no decimal places.......)
![]()


dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Engines For Sale SOLD
Better then being a dumb azz...dfree383 wrote:Thats not the End..... Thats the Beginning..... Smart Ass.....schmitty wrote:Ok, $0652, but I don't see how that makes much of a difference.dfree383 wrote:Need A "0" on the end (and no decimal places.......)
![]()
![]()
![]()

QtrWarrior- Posts : 2571
Join date : 2008-12-02
Age : 59
Location : Bloomingdale, Ga
Re: Engines For Sale SOLD
It could be the front end??dfree383 wrote:Thats not the End..... Thats the Beginning..... Smart Ass.....schmitty wrote:Ok, $0652, but I don't see how that makes much of a difference.dfree383 wrote:Need A "0" on the end (and no decimal places.......)
![]()
![]()
![]()

jasonf- BBF CONTRIBUTOR
- Posts : 2865
Join date : 2009-07-14
Age : 49
Location : Lafayette, LA
Re: Engines For Sale SOLD
richter69 wrote:651 bucks
I've been reading this stupid 651 in other threads and wondered wtf? Your crazy.

jasonf- BBF CONTRIBUTOR
- Posts : 2865
Join date : 2009-07-14
Age : 49
Location : Lafayette, LA
Re: Engines For Sale SOLD
[quote="jasonf"][quote="richter69"]651 bucks[/quote]
I've been reading this stupid 651 in other threads and wondered wtf? Your crazy.
[/quote]It's Fabio code........ He makes himself laugh. 
I've been reading this stupid 651 in other threads and wondered wtf? Your crazy.


dfree383- BBF CONTRIBUTOR
- Posts : 14212
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Page 1 of 3 • 1, 2, 3
Page 1 of 3
Permissions in this forum:
You cannot reply to topics in this forum