557 TFS street build 861 hp-753 tq

557 TFS street build 861 hp-753 tq

--------------------------------------------------------------------------------

557 build



4.440 bore x 4.5 stroke
D1 block
Cat 4 bolt billet caps
4340 forged Scat crank from Adney Brown
4340 6.8 length Eagle H beam rods
Flat top BRC pistons
Comp cams solid roller 307-324 adv. 278-286 @ .050 with .785-.778 lift On a 111 sep
Ported victor with dom. flange
1150 Quick fuel carb tuned buy Phillip Oakley
TFS streets ported by Charlie Evans
Danny B belt drive on loan by Lem Evans for testing on dyno
Moroso fox pan and pick up
Kasse oil pump
2 1/8 th primary x 4 inch collector Kooks headers used from Alan Mackie

Rpm TQ HP Oil pres.
4500 732 627 74.6
4600 745 652 74.6
4700 750 671 74.4
4800 753 689 74.3
4900 752 702 74.3
5000 750 714 74.3
5100 748 726 74.2
5200 745 738 73.9
5300 742 749 73.3
5400 742 763 73.2
5500 741 776 72.7
5600 741 790 71.8
5700 740 803 71.5
5800 739 817 71.4
5900 736 827 71.4
6000 733 838 71.7
6100 726 844 72.4
6200 723 853 72.7
6300 715 858 73.1
6400 706 860 73.7
6500 696 861 73.7
6600 682 857 72
6700 670 854 71.4
6800 657 851 69.5
6900 638 839 68

Link to progression of track testing.
http://www.460ford.com/forum/showthread.php?t=121129

Nice build..how much compression are you running?

Thanks Derek,

After I put the 4 bolt caps on and put the 4340 crank in it the pistons were a positive .0075 . so it was closer to 15:1.

Here is a video of this beast burning the tires on the big end at clarksville tn drag way

Sweet car. What does it run?

Derek,

Thanks

It ran a 5.70 flat (1.31 60ft) spinning bad( shook so hard it through the tail light lens out) at Bowilng green last fall , with the ported TFS Streets. I went from a 28 x 10.5 to a 29.5 x 13.5 tire and ran a 5.67 with a 1.26 60 ft this year at the Bash with the Proto type Street heads Charlie and I ported.

I sold my heads to Lone wolf (Chuck Hagar) and have a set of P-51's to go on it later this year. Right now I am dropping on a set of cast SCJ's I ported, to see how they will run.

It wouldn't surprise me if the Snake runs some 5.70's or 5.80's.I've seen the SCJ's and they are looking mighty fine.Boy wouldn't that be something.I guess you could call these "experimental" heads??? ---RED

Looks good Blake

Thanks.............

Blake,

How much more HP and Tq do ya think the build would have made with a set of Max effort TFS A460's ?

That Cars a Rocket as it is tho !!

Russ,

It wouldn't be as good as it could be, if it was a bigger bore. I think I would do an engine like Bruno's or Boo Boo's, 4.3 crank and a bigger bore. The bigger bore being the most important. I hate to guess but, 1050-1070 hp probably, if all was right with the combo. And it made the same hp per cfm as my engine does now.

Thanks

richter69 wrote:We'll find out what a big bore 4.3 stroke tfs street head motor is capable of this winter.

Just make sure you have it ready for the Bash.

richter69 wrote:We'll find out what a big bore 4.3 stroke tfs street head motor is capable of this winter.

We will? Then maybe you and I need to talk. (270)685-4654. It's not too early to get started on things now.

Uncle Charlie