BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Cam/PTV clearance question

3 posters

Go down

Cam/PTV clearance question Empty Cam/PTV clearance question

Post  Darren1320 February 13th 2014, 12:38 am

I have a stock stroke 466 with lunati flat tops not sure on valve reliefs. Have edelbrock performer rpm heads. 75cc, 2.19, 1.76 valves. 1.73 rockers, Cometic MLS head gasket not sure how thick. My queation is how big of a cam do you think I can go? I've been interested in the solid roller cam from ford racing 521" crate motors. It's around 640 lift. Thanks

Darren1320

Posts : 5
Join date : 2013-01-29

Back to top Go down

Cam/PTV clearance question Empty Re: Cam/PTV clearance question

Post  LivermoreDave February 13th 2014, 10:50 am

Time to do your homework or allow someone to do it for you!

Dave.

LivermoreDave

Posts : 972
Join date : 2009-09-27
Location : North of the Equator.

Back to top Go down

Cam/PTV clearance question Empty Re: Cam/PTV clearance question

Post  cool40 February 13th 2014, 12:30 pm

Only way to know is check it.don't assume you have enough or the results my be bad.
cool40
cool40
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 7307
Join date : 2009-08-31
Age : 53
Location : on the 1/8 mile dyno

Back to top Go down

Cam/PTV clearance question Empty Re: Cam/PTV clearance question

Post  Darren1320 February 13th 2014, 1:15 pm

Alright thanks

Darren1320

Posts : 5
Join date : 2013-01-29

Back to top Go down

Cam/PTV clearance question Empty Re: Cam/PTV clearance question

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum