fuel pumps and fuel pressure

I want to install a sufficient fuel system for my build. im running a 502 with an 1150 dominator, approximately 650 to 700 hp. this is a street an strip application,any recomedations   

http://www.magnumforceracing.com/store4/magnaflow/magnaflow_fuel_system_technical_notes.htm Alot of good info here, and the formula to calculate GPM by HP.

hey supervel thanks big help  

I am partial to Aeromotive they have a similar sizing program. It will say that an A1000 will be a good fit.

http://aeromotiveinc.com/2010/01/fuel-pumps-and-horsepower/comment-page-1/ The plug in calculators seem to be for fuel injected engines, at least the ones I have found. Here is one for aeromotive. I am not recomending or pushing any brands, by the way. I just ran across the first link and listed it for the information.

I dig the A1000's personally. I run them in both my BBF strokers. 10AN feed, 8AN return, 6AN up to the carbs from the Aeromotive carb regulator. Lots of fuel and keeps it moving around so it don't boil off or pressure creep.