A460 block
3 posters
Page 1 of 1
A460 block
I have an A460 18 head bolt block I'm not going to use for my build.
Currently 4.550 bore could use a clean up hone. I was going to bump it to 4.560 to run a standard off the shelf piston.
Block is in very nice used condition. It has two sleeves in the rear two cylinders. Done very nicely.
This an older block, and has extra material in it that the newer A blocks don't have.
I can text or email pics.
616-325-5571 or Greatlakesracecraft@gmail.com
1500 or best I prefer pick up. I am going to North Carolina next week and to St. Louis in a few weeks so I could drop off in route to either derection.
Located just south of Grand Rapids, Mi
Thanks Andy
Currently 4.550 bore could use a clean up hone. I was going to bump it to 4.560 to run a standard off the shelf piston.
Block is in very nice used condition. It has two sleeves in the rear two cylinders. Done very nicely.
This an older block, and has extra material in it that the newer A blocks don't have.
I can text or email pics.
616-325-5571 or Greatlakesracecraft@gmail.com
1500 or best I prefer pick up. I am going to North Carolina next week and to St. Louis in a few weeks so I could drop off in route to either derection.
Located just south of Grand Rapids, Mi
Thanks Andy
Last edited by AndyLeslie on May 16th 2016, 1:59 pm; edited 2 times in total
AndyLeslie- Posts : 57
Join date : 2014-09-06
Location : Caledonia, Mi
Re: A460 block
Here are the bottom of the sleeves. And all the other cylinders.
That is red wheel bearing grease on everything. The guy I got from coated most all the surfaces with that. So it looks like crap in pictures.
That is red wheel bearing grease on everything. The guy I got from coated most all the surfaces with that. So it looks like crap in pictures.
AndyLeslie- Posts : 57
Join date : 2014-09-06
Location : Caledonia, Mi
Re: A460 block
Interested in trades or partial trades as well. I need a set of 2" big block headers for my 67 mustang. Also need a single plane, dominator intake, a 1150 or bigger dominator. And a set of pistons for a CJ heads, 4.500/6.7 combo 4.390 to 4.440 bores. And a decent solid roller cam.
AndyLeslie- Posts : 57
Join date : 2014-09-06
Location : Caledonia, Mi
Re: A460 block
Have set of crites headers of my 67 fastback i want to part with if you are looking to buy used ones.
slurm- Posts : 102
Join date : 2011-09-16
Age : 43
Location : north dakota
Re: A460 block
I hope to buy those from ya if this hunk of iron sells quick enough!
AndyLeslie- Posts : 57
Join date : 2014-09-06
Location : Caledonia, Mi
Re: A460 block
I'll take the block Andy , PM sent. Thanks Bryan.
nuclearcobra- BBF CONTRIBUTOR
- Posts : 1385
Join date : 2009-08-16
Location : Delaware Coast
Re: A460 block
Well i gave it a week , So i guess you sold it or changed your mind about selling it maybe ? I was just curious seeing how i called , text and sent you a PM , Anyway hope all is well.
nuclearcobra- BBF CONTRIBUTOR
- Posts : 1385
Join date : 2009-08-16
Location : Delaware Coast
Similar topics
» Cometic MLS head gaskets
» Differences between stock type block and the a460 block?
» distributer block hole is too small on an A460 block
» wanted a460 block or eliminator block.
» wtb A460 block or Eliminator Block
» Differences between stock type block and the a460 block?
» distributer block hole is too small on an A460 block
» wanted a460 block or eliminator block.
» wtb A460 block or Eliminator Block
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|