PISTON SELL OFF ("You Name It, We Got It")

View previous topic View next topic Go down

PISTON SELL OFF ("You Name It, We Got It")

Post  Paul Kane on September 27th 2016, 3:40 pm

Piston Sell Off


Here's a collection of forged piston sets, some new, some used, all kinds of sizes, for all kinds of uses from naturally aspirated to blown applications, all in great condition. Pictures available upon request.  All prices are plus shipping, all questions please call me directly.


  • Ross 460 Dome Top Pistons #1. Ross #1 Domed Pistons & Rods Are Sold
     For OEM 460 stroke, H-beam rods included, for 4.39" bore, 0.440" dome, 2.93" pins, 1.765" c/h, 1/16" rings, very lightly used, includes H-beam rod set with one resized (this was deemed unnecessary but we did it anyway to keep the buyer happy), rings included and are perfectly reusable, far superior to TRW Speed Pro dome tops, just rinse 'em clean and put 'em in.  Custom pistons, pins, rings, and rods, all said about $1500 new, sell for $---
  • Ross 460 Dome Top Pistons #2.  Ross #2 Domed Pistons Are Sold  New, for OEM 460 stroke and rods, for 4.44" bore, 0.425" dome, accepts 1/16" rings, installed into short block on a stand then removed, far superior to TRW Speed Pro dome tops, these are brand new and unused, pistons pins & clips:  $---
  • Ross 460 Dome Top Pistons #3.  Ross #3 Domed Pistons Are Sold New, for OEM 460 stroke and rods, for 4.44" bore, 0.090" dome, accepts 1/16" rings, far superior to TRW Speed Pro dome tops, these are brand new in box and unused, pistons pins & clips:  $---
  • Ross Flat Top Pistons.  For 4.50" bore, std valve layout, 0.990" c/h, pistons only, accepts 1/16" rings & 2.93" BBF pin, new:  $300
  • Ross Flat Top Pistons.  This set of pistons requires two sets of rings (or a single custom order set) in order to be used (call for details if interested), for 4.47" bore, 0.990" pin, 1.52" c/h, accepts 5/64" rings, pistons only, you cut the valve relief:  Set of 8 new pistons for just $189
  • KB Icon IC855 forged pistons.  KB855 Pistons Are Sold For 4.40" bore, 1.577" c/h, accepts 1/16" ring pack, includes pistons and 0.990" pins, for standard valve layout heads, works with 6.8" rod and 460 stroke, or 6.7" rod and 4.05" stroke, or 6.66" rod and 4.14" stroke. Brand new retail from KB is $627, sell for $---
  • Probe forged Flat Top pistons for FRPP crate motors. FRPP Crate motor Pistons Are Sold BBF pin, 1.532" c/h, for 4.44" bore, new pistons pins & clips: $---
  • Ross Forged Pistons for Bastard Pro Stock Heads.  4.605" bore, 1.352" c/r, 0.043" ring pack, vertical gas ported, lightened, hollow dome, net 15cc dome, ~640g, Set of 10 pistons with 8 pins (8 run pistons & 8 pins + 2 brand new unused spare pistons): About $1500 new, sell $500
  • Arias Forged Pistons for Olds 403/Ford Stroker.  Arias Olds/Ford Stroker Pistons Are Sold Can be used to build a Ford stroker as follows: these Olds 403 pistons + Pontiac 6.625" rod ($288 from RPM) + 4.10" offset stroke 460 crank = 494 cubic inches with 10.30" stack height.  10:1 c/r with D3's and 12:1 c/r with D0VEs. Valve reliefs should be cut for the 460 head used.  Arias retails these for $780, set of 8 new pistons with pins for $---
  • Venolia Blower Pistons.  Venolia Blower Pistons Are Sold For 4.600" bore, 1.427" c/h, accepts Chrysler 1.094" pin & 0.043" 1/16" 3/16" ring pack, set of 10 new pistons:  $---
  • Wiseco Blower Pistons (or pump gas stroker pistons).  For 4.500" bore, 42cc dish, 0.990" pin, 1.435" c/h, accepts 1/16" rings, set of 10, pistons pins & clips, new:  $550


Pictures available upon request.  Please call directly with any questions and/or to purchase,

Paul
31Zero-435-19ZeroZero


Last edited by Paul Kane on March 18th 2017, 1:22 pm; edited 11 times in total
avatar
Paul Kane

Posts : 709
Join date : 2009-09-15
Location : San Francisco Bay Area

View user profile http://www.highflowdynamics.com

Back to top Go down

Re: PISTON SELL OFF ("You Name It, We Got It")

Post  Frank Merkl on September 29th 2016, 10:03 pm

Send me pic's of the venolia blower pistions fmerkl@eidnet.org
Frank
avatar
Frank Merkl

Posts : 1324
Join date : 2008-12-17
Age : 61
Location : Brooks ,Alberta ,Canada

View user profile

Back to top Go down

Re: PISTON SELL OFF ("You Name It, We Got It")

Post  Paul Kane on September 29th 2016, 10:35 pm

Frank Merkl wrote:Send me pic's of the venolia blower pistions  fmerkl@eidnet.org
Frank
Hey Frank!

You got mail.

Paul

P.S. I don't have the top ring down measurement but I'm going back to the shop tonight so I'll follow up with that info a little bit later via another email.  The rest of the piston info and pics are already in the current email.
avatar
Paul Kane

Posts : 709
Join date : 2009-09-15
Location : San Francisco Bay Area

View user profile http://www.highflowdynamics.com

Back to top Go down

Re: PISTON SELL OFF ("You Name It, We Got It")

Post  Paul Kane on December 17th 2016, 2:36 pm

avatar
Paul Kane

Posts : 709
Join date : 2009-09-15
Location : San Francisco Bay Area

View user profile http://www.highflowdynamics.com

Back to top Go down

Re: PISTON SELL OFF ("You Name It, We Got It")

Post  Skipped_link on January 15th 2017, 1:24 pm

Paul Kane wrote: Ross Flat Top Pistons. For 4.50" bore, std valve layout, 0.990" c/h, pistons only, accepts 1/16" rings & 2.93" BBF pin, new: $300
This c/h for something along the lines of a 5" stroke 6.800 rod? can't say I've run accrossed this combo before,
Also "2.93 BBF pin" is that 2.93 wide, normal 460 diameter?


Skipped_link

Posts : 18
Join date : 2016-07-05

View user profile

Back to top Go down

Re: PISTON SELL OFF ("You Name It, We Got It")

Post  Paul Kane on January 23rd 2017, 3:42 pm

Skipped_link wrote:
Paul Kane wrote: Ross Flat Top Pistons.  For 4.50" bore, std valve layout, 0.990" c/h, pistons only, accepts 1/16" rings & 2.93" BBF pin, new:  $300
This c/h for something along the lines of a 5" stroke 6.800 rod? can't say I've run accrossed this combo before,
Also "2.93 BBF pin" is that 2.93 wide, normal 460 diameter?
Hey Leroy I've been away on other business,

Yes, those pin dimensions are correct (1.040" x 2.93"). I didn't personally order these pistons and my speculatoin is that whoever did probably called Ross, placed an order for BBF pistons, and then said, "I want a 0.990" pin," at which point Ross probably put the BBF pin at 0.990" c/h.

I acquired them and was going to use them on a 4.6 stroke, 7-inch aluminum rod engine.  You can use them however you want, but note that the ring pack is very tight and up high.  Lately I've entertained the idea of using them elsewhere.  Feel free to call and discus if interested.
avatar
Paul Kane

Posts : 709
Join date : 2009-09-15
Location : San Francisco Bay Area

View user profile http://www.highflowdynamics.com

Back to top Go down

Re: PISTON SELL OFF ("You Name It, We Got It")

Post  Paul Kane on March 18th 2017, 1:51 pm

avatar
Paul Kane

Posts : 709
Join date : 2009-09-15
Location : San Francisco Bay Area

View user profile http://www.highflowdynamics.com

Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum