Chuck A. Rodney the 712 chassis dyno take 2

View previous topic View next topic Go down

Chuck A. Rodney the 712 chassis dyno take 2

Post  mercmerk on November 1st 2016, 1:03 pm

Well after sorting thru the damage of the last attempt of the 712 at the dyno. I managed to get every thing beat straight welded back together with a new sleeve/ rods etc and fix few things that were missed the last time ... pics of the damage to follow. ...Unloaded off the trailer nothing but a random guess at the na tune up the 712 put down a pretty ok number at 1028rwhp on a pretty rich tune. Then came n20 pulls we only got to try 1 stage as we were fighting crank trigger issues with what we determined to be weak magnets in the wheel making us have to run the pick up down to .018 on the last pull before the wheel tagged the sensor when we shut it down .Which left us dead in the water the only jug pulls we made as soon as the edge convertor started to lock up and the kit came on it spun hard on the dyno . As soon as 40n 30f fogger came on we lost 20mph on the rollers lol on the 2nd pull. First n20 hit when the kit came on we aborted almost instantly as the vibrations crashed the dyno ecu and we had to reboot it and insulate it .... As you can see in the vids when the car comes on the kit nothing in the shop is safe from drawers falling out of cabinets to pop empties flying out the cell. wrenches moving etc .....When I turn both the kits on this thing its going to be mean.... Enjoy




mercmerk

Posts : 7
Join date : 2009-09-16
Age : 28
Location : BROOKS AB

View user profile

Back to top Go down

Re: Chuck A. Rodney the 712 chassis dyno take 2

Post  bruno on November 1st 2016, 5:22 pm

violent !!!

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
avatar
bruno
Moderator
Moderator

Posts : 10459
Join date : 2008-12-02
Age : 44
Location : MILLBROOK , AL.

View user profile http://WWW.CKRME.COM

Back to top Go down

Re: Chuck A. Rodney the 712 chassis dyno take 2

Post  mercmerk on November 1st 2016, 5:34 pm

now me and ol frank will be ready for vegas scsn this month ... we are still bringing a spork to a gun fight but at least the spork is sharp now lol

mercmerk

Posts : 7
Join date : 2009-09-16
Age : 28
Location : BROOKS AB

View user profile

Back to top Go down

Re: Chuck A. Rodney the 712 chassis dyno take 2

Post  Mike R on November 1st 2016, 8:13 pm

affraid affraid affraid Bad ass

Mike R

Posts : 1198
Join date : 2009-08-05
Age : 56
Location : St Paul Mn

View user profile

Back to top Go down

Re: Chuck A. Rodney the 712 chassis dyno take 2

Post  billandlori on November 1st 2016, 9:04 pm

Wow, that thing really shakes the ground!!

Good luck with it, she should be a wild ride!!

Bill
avatar
billandlori

Posts : 2081
Join date : 2009-08-06
Age : 48
Location : Stratford, Ontario, Canada

View user profile

Back to top Go down

Re: Chuck A. Rodney the 712 chassis dyno take 2

Post  Frank Merkl on November 7th 2016, 3:32 am

Chuck A Rodney is an animal!! VIVA! Las Vegas!!!!!
Frank
avatar
Frank Merkl

Posts : 1326
Join date : 2008-12-18
Age : 61
Location : Brooks ,Alberta ,Canada

View user profile

Back to top Go down

Re: Chuck A. Rodney the 712 chassis dyno take 2

Post  Frank Merkl on November 7th 2016, 3:35 am

Anyone Know a Chassis guy that will be in Las Vegas that can give us a hand ?? as were going to need one !! this motor is nuts!!! on 10.5W's
Frank
avatar
Frank Merkl

Posts : 1326
Join date : 2008-12-18
Age : 61
Location : Brooks ,Alberta ,Canada

View user profile

Back to top Go down

Re: Chuck A. Rodney the 712 chassis dyno take 2

Post  dfree383 on November 7th 2016, 8:04 am

Nice
avatar
dfree383
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 13411
Join date : 2009-07-09
Location : Home Wif Da Wife.....

View user profile

Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum