BBF used N/A rotating assembly and cam
2 posters
Page 1 of 1
BBF used N/A rotating assembly and cam
Topgunn1 November 20th 2016, 2:47 am
crank - scat billet crankshaft 4.125 strokewith sbc (2100) journals on standard/standard
rods -bme rods 6.650 c/c 396 forgings
pistons - je dome (10cc) 043-043-3mm ring package, 4.600 bore, 1.575ch
camshaft - 60mm u9386-11.....281-296 @ 050.....948/910 lift (1.80 ratio)....116-114.
Located in Huntsville,Al 228-369-0790
rods -bme rods 6.650 c/c 396 forgings
pistons - je dome (10cc) 043-043-3mm ring package, 4.600 bore, 1.575ch
camshaft - 60mm u9386-11.....281-296 @ 050.....948/910 lift (1.80 ratio)....116-114.
Located in Huntsville,Al 228-369-0790
Topgunn1- Posts : 7
Join date : 2013-02-23
Re: BBF used N/A rotating assembly and cam
Mark Laczo November 21st 2016, 11:49 am
What heads those pistons fit, gonna guess an A or C ?
Mark Laczo- Posts : 274
Join date : 2009-08-06
Age : 56
Location : Rimbey, Alberta
Re: BBF used N/A rotating assembly and cam
Topgunn1 November 21st 2016, 11:59 am
Yes sir, C-head 60cc chamber. 14.1 piston 17.1 compression. I also have a spare set of rods to go with the set up that are also used.
Topgunn1- Posts : 7
Join date : 2013-02-23
Similar topics» rotating ass. push rods msd pistons ''''c-460 pistons added to rotating assembly''''
» used rotating assembly
» Balanced Rotating assembly
» 598 Rotating assembly
» 521 rotating ass. with A429 heads
» used rotating assembly
» Balanced Rotating assembly
» 598 Rotating assembly
» 521 rotating ass. with A429 heads
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|