Remote thermostat housing / water lines

Go down

Remote thermostat housing / water lines

Post  JBR-3 on November 20th 2016, 2:56 pm

Want to run a hose from the front of each head to a remote thermostat housing/collector.

How big to make these lines ? 3/4-inch big enough ?

Not sure if I want to make this the water fill point as well, or fill on the radiator.

Anyone have photos ?

JBR-3

Posts : 194
Join date : 2009-08-17

View user profile

Back to top Go down

Re: Remote thermostat housing / water lines

Post  Lem Evans on November 20th 2016, 6:54 pm

Surely 3/4" would be plenty big -12 hose is but 11/16" I.D.

Lem Evans

Posts : 7148
Join date : 2008-12-03
Location : Livermore , Ky

View user profile http://bfevansraceparts.com

Back to top Go down

Re: Remote thermostat housing / water lines

Post  JBR-3 on November 20th 2016, 10:40 pm

Thank you sir.

JBR-3

Posts : 194
Join date : 2009-08-17

View user profile

Back to top Go down

Re: Remote thermostat housing / water lines

Post  Wheelie58 on November 23rd 2016, 8:16 am

I can give you some ideas on the tank with a cap that joins the 2 lines and has a single fitting going to the radiator. It also has a fitting for  the temp sender.
Send an email to kfmotorsports@aol.com or call me at 678-458-2033 and I will send pictures.
Thank you,
Keith
avatar
Wheelie58

Posts : 1840
Join date : 2009-08-08
Location : Alpharetta, GA

View user profile http://www.keithfulpmotorsports.com

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum