BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

A460 pistons

3 posters

Go down

A460 pistons Empty A460 pistons

Post  EverySparePenny August 13th 2019, 11:07 am

Looking at acquiring a set of NOS Childs and Albert pistons, "MAX" dome for the Ford Motorsports A460 heads in a 4.440" bore

Can anyone enlighten me on how much cutting is necessary to make these fit a D0OE head? Heads have a 66cc chamber.

Thank you

EverySparePenny

Posts : 114
Join date : 2017-12-19
Location : Iowa

Back to top Go down

A460 pistons Empty Re: A460 pistons

Post  rmcomprandy August 13th 2019, 3:26 pm

EverySparePenny wrote:Looking at acquiring a set of NOS Childs and Albert pistons, "MAX" dome for the Ford Motorsports A460 heads in a 4.440" bore

Can anyone enlighten me on how much cutting is necessary to make these fit a D0OE head?  Heads have a 66cc chamber.

Thank you

They are not even close.

rmcomprandy

Posts : 6095
Join date : 2008-12-02
Location : Roseville, Michigan

http://www.rmcompetition.com

Back to top Go down

A460 pistons Empty Re: A460 pistons

Post  BBFTorino August 13th 2019, 11:30 pm

Completely different pistons...they have very different valve relief's and dome tops.

BBFTorino

Posts : 982
Join date : 2015-12-31

Back to top Go down

A460 pistons Empty Re: A460 pistons

Post  EverySparePenny September 1st 2019, 11:55 am

Thank you guys.

I did abandon the idea based on your recommendation.

Thanks again

EverySparePenny

Posts : 114
Join date : 2017-12-19
Location : Iowa

Back to top Go down

A460 pistons Empty Re: A460 pistons

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum