Full porting instructions for iron passenger car castings on RHP's site...
Page 1 of 2 • Share •
Page 1 of 2 • 1, 2 
Full porting instructions for iron passenger car castings on RHP's site...
The Mad Porter on March 11th 2010, 2:05 am
For those wishing to port their own iron passenger car heads RHP has in depth instructions with tons of pics to guide you along your way.
There are additional informational pages such as early and late timing set differences, rocker arm differences and pics of ported iron cj, pi, eddy aluminum and A-429 aluminum cj castings.
There is a 1 time subscription fee of $29.95 ( yes we finally had to raise it after 6 years)
http://reincarnation-automotive.com
Click on the BBF technical index link (how to subscribe) and follow the instructions. You will be emails a password with payment confirmation. We have over 1000 paid subscribers...
We offer email help in clarification as needed.
There are additional informational pages such as early and late timing set differences, rocker arm differences and pics of ported iron cj, pi, eddy aluminum and A-429 aluminum cj castings.
There is a 1 time subscription fee of $29.95 ( yes we finally had to raise it after 6 years)
http://reincarnation-automotive.com
Click on the BBF technical index link (how to subscribe) and follow the instructions. You will be emails a password with payment confirmation. We have over 1000 paid subscribers...
We offer email help in clarification as needed.
The Mad Porter- Posts: 131
Join date: 2009-08-07
Age: 48
Location: Tacoma, Washington 
Re: Full porting instructions for iron passenger car castings on RHP's site...
ThndrChkn on March 11th 2010, 8:49 am
Just to add. This will be the best $30.00 you'll ever spend, for some of the best online and verbal advise you'll find anywhere for the BBF iron castings.
Doug...
Doug...
ThndrChkn- Posts: 1793
Join date: 2008-12-03
Age: 45
Location: Helena, Montana -
Re: Full porting instructions for iron passenger car castings on RHP's site...
johndickjr on March 13th 2010, 2:17 pm
i just paid with paypal..how do i get my sign in name and password..thanks
johndickjr- Posts: 540
Join date: 2009-08-06
Location: northeast oklahoma -
Re: Full porting instructions for iron passenger car castings on RHP's site...
The Mad Porter on March 13th 2010, 2:46 pm
johndickjr wrote:i just paid with paypal..how do i get my sign in name and password..thanks
The password and user name have been sent. Due to the age of the server i must do this manually after payment confirmation.
The Mad Porter- Posts: 131
Join date: 2009-08-07
Age: 48
Location: Tacoma, Washington -
Re: Full porting instructions for iron passenger car castings on RHP's site...
jesse on March 13th 2010, 4:21 pm
i di dthis a few yrs back
the info i got off there has been awsome
i would not touch a set of heads with out joining his site
thanxs scotty
the info i got off there has been awsome
i would not touch a set of heads with out joining his site
thanxs scotty
jesse- Posts: 449
Join date: 2009-03-18
Age: 32
Location: little falls, mn -
Re: Full porting instructions for iron passenger car castings on RHP's site...
The Mad Porter on March 15th 2010, 2:46 pm
jesse wrote:i di dthis a few yrs back
the info i got off there has been awsome
i would not touch a set of heads with out joining his site
thanxs scotty
Thank you for the good word Jesse...
The Mad Porter- Posts: 131
Join date: 2009-08-07
Age: 48
Location: Tacoma, Washington -
Re: Full porting instructions for iron passenger car castings on RHP's site...
John I. on March 16th 2010, 9:45 pm
A couple of things...
I subscribed to your site a few years back, and then my house burnt down and took everything with it - (computer and little black book with passwords) and I can't get back on bvecause I don't know my password, and my e-mail addy is different. If I have to re-pay, I don't mind, but maybe you could check if you have time. E-mail would have been jkirwin@eidnet.org or something close to that.
Second thing, do you have instructions for D00E-R heads? I'm looking to port a set for my 545 motor for my F150, if I ever get it built.
I subscribed to your site a few years back, and then my house burnt down and took everything with it - (computer and little black book with passwords) and I can't get back on bvecause I don't know my password, and my e-mail addy is different. If I have to re-pay, I don't mind, but maybe you could check if you have time. E-mail would have been jkirwin@eidnet.org or something close to that.
Second thing, do you have instructions for D00E-R heads? I'm looking to port a set for my 545 motor for my F150, if I ever get it built.
John I.- BBF CONTRIBUTOR
- Posts: 162
Join date: 2009-08-08
Age: 55
Location: Patricia, Alberta -
Re: Full porting instructions for iron passenger car castings on RHP's site...
The Mad Porter on March 16th 2010, 10:37 pm
John I. wrote:A couple of things...
I subscribed to your site a few years back, and then my house burnt down and took everything with it - (computer and little black book with passwords) and I can't get back on bvecause I don't know my password, and my e-mail addy is different. If I have to re-pay, I don't mind, but maybe you could check if you have time. E-mail would have been jkirwin@eidnet.org or something close to that.
Second thing, do you have instructions for D00E-R heads? I'm looking to port a set for my 545 motor for my F150, if I ever get it built.
Found your receipt...
Telephone me or email me for the information...
Iron cj porting instructions are sparse mostly just pics. The same techniques apply to all cylinder heads though...
The Mad Porter- Posts: 131
Join date: 2009-08-07
Age: 48
Location: Tacoma, Washington -
Re: Full porting instructions for iron passenger car castings on RHP's site...
billandlori on March 21st 2010, 8:42 pm
What sort of gains have you seen on the Eddy heads Scotty?
I have the Performer RPM 95cc ones. Buying another set of heads is not in the cards for a while!! I did clean up the casting flash in the ports when I got them but no more.
Bill
I have the Performer RPM 95cc ones. Buying another set of heads is not in the cards for a while!! I did clean up the casting flash in the ports when I got them but no more.
Bill
billandlori- Posts: 1804
Join date: 2009-08-06
Age: 42
Location: Stratford, Ontario, Canada -
Re: Full porting instructions for iron passenger car castings on RHP's site...
John I. on March 21st 2010, 9:48 pm
Thanks Scott, I'm all fixed up now.
John I.- BBF CONTRIBUTOR
- Posts: 162
Join date: 2009-08-08
Age: 55
Location: Patricia, Alberta -
Re: Full porting instructions for iron passenger car castings on RHP's site...
The Mad Porter on March 21st 2010, 10:15 pm
billandlori wrote:What sort of gains have you seen on the Eddy heads Scotty?
I have the Performer RPM 95cc ones. Buying another set of heads is not in the cards for a while!! I did clean up the casting flash in the ports when I got them but no more.
Bill
With full port but not max effort...
From 326 max intake to 360 to 370
From 200ish exhaust max to 245 max
The Mad Porter- Posts: 131
Join date: 2009-08-07
Age: 48
Location: Tacoma, Washington -
Re: Full porting instructions for iron passenger car castings on RHP's site...
billandlori on March 22nd 2010, 4:17 am
The Mad Porter wrote:billandlori wrote:What sort of gains have you seen on the Eddy heads Scotty?
I have the Performer RPM 95cc ones. Buying another set of heads is not in the cards for a while!! I did clean up the casting flash in the ports when I got them but no more.
Bill
With full port but not max effort...
From 326 max intake to 360 to 370
From 200ish exhaust max to 245 max
Wow, that's worth the effort!! Thanks Scotty, I'll be signing up soon.
Bill
billandlori- Posts: 1804
Join date: 2009-08-06
Age: 42
Location: Stratford, Ontario, Canada -
Re: Full porting instructions for iron passenger car castings on RHP's site...
dfree383 on March 22nd 2010, 9:33 am
billandlori wrote:The Mad Porter wrote:billandlori wrote:What sort of gains have you seen on the Eddy heads Scotty?
I have the Performer RPM 95cc ones. Buying another set of heads is not in the cards for a while!! I did clean up the casting flash in the ports when I got them but no more.
Bill
With full port but not max effort...
From 326 max intake to 360 to 370
From 200ish exhaust max to 245 max
Wow, that's worth the effort!! Thanks Scotty, I'll be signing up soon.
Bill
Definetly..... I'll have to sign up and get started on my set.
dfree383- Posts: 5979
Join date: 2009-07-09
Location: Everywhere -
Re: Full porting instructions for iron passenger car castings on RHP's site...
The Mad Porter on March 28th 2010, 8:08 pm
dfree383 wrote:billandlori wrote:The Mad Porter wrote:billandlori wrote:What sort of gains have you seen on the Eddy heads Scotty?
I have the Performer RPM 95cc ones. Buying another set of heads is not in the cards for a while!! I did clean up the casting flash in the ports when I got them but no more.
Bill
With full port but not max effort...
From 326 max intake to 360 to 370
From 200ish exhaust max to 245 max
Wow, that's worth the effort!! Thanks Scotty, I'll be signing up soon.
Bill
Definetly..... I'll have to sign up and get started on my set.
You think you're cute there Freelander??? Bite me and stay the hell out of my threads
Do ya read me?
The Mad Porter- Posts: 131
Join date: 2009-08-07
Age: 48
Location: Tacoma, Washington -
Page 1 of 2 • 1, 2
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum