TFS A460 Heads
5 posters
Page 1 of 1
TFS A460 Heads
Guy's as most of you know i'm going w/new A460 block. My engine is apart and while it's apart I may make a change if anyone is interested in my heads. They were rubbed on by Charlie Evans . They have 2.30/1.88 Stainless valves. They will come w/800 lift springs and stock TFS retainers and clips. Mike Phillip's and Charlie did a comp. valve job while they were in Ky. The engine was just ran a little and never went past 4000 rpm and was never down the track. They are in new condition.I will send Flow sheet to anyone who is seriously interested. If they don't sell w/in 3 weeks they will be on my new block at the Bash. $3000.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: TFS A460 Heads
Rick,
They sound like a nice pair of heads just run them man!!!
Later Mark.
They sound like a nice pair of heads just run them man!!!
Later Mark.
Mark Miller- Posts : 1861
Join date : 2009-09-01
Re: TFS A460 Heads
3000 ...thats pretty cheap there Ricky !!!!
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
Re: TFS A460 Heads
if and only if
Maddmattmustangs- Posts : 1201
Join date : 2010-02-15
Age : 33
Location : Berryville, Arkansas
Similar topics
» question on compression ...using pump gas (a460...using fms a460 heads)
» Cometic MLS head gaskets
» Question about TFS A460 and Motorsport A460 heads
» Wtb a460 heads
» BBF PARTS - B460 Heads, A460 HEADS - MUCH MORE
» Cometic MLS head gaskets
» Question about TFS A460 and Motorsport A460 heads
» Wtb a460 heads
» BBF PARTS - B460 Heads, A460 HEADS - MUCH MORE
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|