2000 Mustang Outlaw rolling chassis
Page 1 of 2 • Share •
Page 1 of 2 • 1, 2 
2000 Mustang Outlaw rolling chassis
Just didn't feel like typing all of it again.
scottke
Member Join Date: Nov 2006
Location: Bowling Green, Ky
Posts: 198
2000 Mustang Outlaw rolling chassis
--------------------------------------------------------------------------------
Well the time has come to move this chassis. I had it built by S/S Race Cars a couple years ago, it has set since. All the tube work is chromoly! Priced that lately? The car is set up for BBF. The front K-member is customyou can drop the oilpan without pulling the engine. Has a funnycar cage should certify to 25.5. Detachable Ford Racing steering wheel. Interior cage work was done so the factory console could be used. The seat mounts were mocked up using kirkey aluminum seats. It has power windows and locks which worked fine at time of dismantle. There is no wireing in the car, I have the factory harness that will go with it.
REAR: Chromoly Fab 9 fully braced
Strange adjustable shocks
Wheelie bar mounts are welded on
Moser aluminum draw thru center section
Moser 35 spline axles
Moser spool
4 link with wishbone
Aerospace race brakes
5/8 studs
Tires/wheels: 15x14 Weld Alumistars (new)
29.5x13.5 M/T slicks (new)
Front suspension: Tubular a arms (custom) the front a-arms are made so the tires set3/4" ahead of stock location. Has some cheapo lakewood stuts right now with stock "93 rotors.
It has a new Skinny Kids wing. Parachute mount is custom.
All the rear suspension, K-member, parachute mount and even the rearend is powder coated mexican chrome and clearcoated. It is only about 20% away from looking like chrome!
I know there is more I'm forgetting.
This car is awesome setting still.
I don't have to sell, but the right offer might get it.
$22,500 I might be interested in a partial trade on a nice 20' or bigger runabout and cash.
Looking for at least $12,000 cash though. No low balling. Like I said, It doesn't have to be sold. Thanks for looking.
Any ? just ask.










scottke
Member Join Date: Nov 2006
Location: Bowling Green, Ky
Posts: 198
2000 Mustang Outlaw rolling chassis
--------------------------------------------------------------------------------
Well the time has come to move this chassis. I had it built by S/S Race Cars a couple years ago, it has set since. All the tube work is chromoly! Priced that lately? The car is set up for BBF. The front K-member is customyou can drop the oilpan without pulling the engine. Has a funnycar cage should certify to 25.5. Detachable Ford Racing steering wheel. Interior cage work was done so the factory console could be used. The seat mounts were mocked up using kirkey aluminum seats. It has power windows and locks which worked fine at time of dismantle. There is no wireing in the car, I have the factory harness that will go with it.
REAR: Chromoly Fab 9 fully braced
Strange adjustable shocks
Wheelie bar mounts are welded on
Moser aluminum draw thru center section
Moser 35 spline axles
Moser spool
4 link with wishbone
Aerospace race brakes
5/8 studs
Tires/wheels: 15x14 Weld Alumistars (new)
29.5x13.5 M/T slicks (new)
Front suspension: Tubular a arms (custom) the front a-arms are made so the tires set3/4" ahead of stock location. Has some cheapo lakewood stuts right now with stock "93 rotors.
It has a new Skinny Kids wing. Parachute mount is custom.
All the rear suspension, K-member, parachute mount and even the rearend is powder coated mexican chrome and clearcoated. It is only about 20% away from looking like chrome!
I know there is more I'm forgetting.
This car is awesome setting still.
I don't have to sell, but the right offer might get it.
$22,500 I might be interested in a partial trade on a nice 20' or bigger runabout and cash.
Looking for at least $12,000 cash though. No low balling. Like I said, It doesn't have to be sold. Thanks for looking.
Any ? just ask.










Last edited by scottke on December 30th 2009, 9:49 pm; edited 3 times in total

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
bump for a sweet looking ride.
Will you tote the note? If so maybe I could work something out.
Will you tote the note? If so maybe I could work something out.

8liter- Posts: 150
Join date: 2009-01-06
Age: 42
Location: Murray KY
Re: 2000 Mustang Outlaw rolling chassis
guys this is a beautiful piece ..scott when you get a chance post some pics for the future buyer 
_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD

bruno- Moderator

- Posts: 7766
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL.

Re: 2000 Mustang Outlaw rolling chassis
bruno wrote:guys this is a beautiful piece ..scott when you get a chance post some pics for the future buyer
Pics are up.

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
Bump for a bad azz car

Old blue Racin Team- Posts: 1398
Join date: 2009-07-03
Age: 21
Location: North Carolina
Re: 2000 Mustang Outlaw rolling chassis
If it does't sell, I'll finish it later when $ allows
.

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
Decided to keep it!

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
Cool man, Keep us updated on what it turns out to be

Old blue Racin Team- Posts: 1398
Join date: 2009-07-03
Age: 21
Location: North Carolina
Re: 2000 Mustang Outlaw rolling chassis
Old blue Racin Team wrote:Cool man, Keep us updated on what it turns out to be
Will do.

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
scottke wrote:Decided to keep it!
Well hell, back up for sale.

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
Might also trade for a nice street/strip coupe or hatchback and cash.

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
Cash and a nice blown coupe car setup.
Cash and a nice Procharger blowthru setup for BBF!
ANYONE!
Cash and a nice Procharger blowthru setup for BBF!
ANYONE!

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
Damn Scott my 429 Boss would look awsome in there with a Lenco......
Randy
Randy

the Coug- Posts: 2224
Join date: 2008-12-02
Re: 2000 Mustang Outlaw rolling chassis
the Coug wrote:Damn Scott my 429 Boss would look awsome in there with a Lenco......![]()
Randy
I agree, it would. It can be yours.

scottke- Posts: 722
Join date: 2009-08-20
Age: 42
Location: Bowling Green, Ky
Re: 2000 Mustang Outlaw rolling chassis
how much does this car weigh,?

studly- Posts: 460
Join date: 2009-08-12
Age: 37
Location: smack talk VA
Page 1 of 2 • 1, 2 
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum