Turbo ?????

Who can I call that sells turbo stuff?

Honestly I don't know. It's been a couple of years since I messed with looking into the turbo setup. You can call bullseye and they will set you up with the right size turbo. Wastegates, blow-off valves, flanges can be found every where. I use to visit the turboforums.com to look for information.

Call Reed at Supernatural Turbo and tell them Justin from Texas sent you there.
http://www.supernaturalturbo.com/
205-516-3946

He will set you straight.

whatbumper wrote:Call Reed at Supernatural Turbo and tell them Justin from Texas sent you there.
http://www.supernaturalturbo.com/
205-516-3946

He will set you straight.

thanks will do!!

whatbumper wrote:Call Reed at Supernatural Turbo and tell them Justin from Texas sent you there.
http://www.supernaturalturbo.com/
205-516-3946

He will set you straight.

I have talked to him about building a set of headers for my truck. I saw him again at SGMP and reminded him that he blew me off! Not a budget type of guy, and a lot of them aren't. Unless you are ready to spend 3,000 - 10,000 they don't take you serious.
I was just wanting him to build me a set of Ms headers, I guess that turned him away.

Brian Brown also blew me off at the last race at Hub. I was trying to ask him if he was interested in building the headers and cage in my truck. I guess once he realized who I was and that I was serious about the work he just refused to talk to me. Which I did corner him before I left the track and he did appologize. I just told him to be honest, if you don't want to work with someone on a budget or just not interested in the project tell me. Don't act interested and then ignore me.

jones wrote:

whatbumper wrote:Call Reed at Supernatural Turbo and tell them Justin from Texas sent you there.
http://www.supernaturalturbo.com/
205-516-3946

He will set you straight.

I have talked to him about building a set of headers for my truck. I saw him again at SGMP and reminded him that he blew me off! Not a budget type of guy, and a lot of them aren't. Unless you are ready to spend 3,000 - 10,000 they don't take you serious.
I was just wanting him to build me a set of Ms headers, I guess that turned him away.

Brian Brown also blew me off at the last race at Hub. I was trying to ask him if he was interested in building the headers and cage in my truck. I guess once he realized who I was and that I was serious about the work he just refused to talk to me. Which I did corner him before I left the track and he did appologize. I just told him to be honest, if you don't want to work with someone on a budget or just not interested in the project tell me. Don't act interested and then ignore me.

hmm, doesn't seem that way. Not saying it didn't happen though. I haven't spent that much with him and he bends over backwards to help me, even at 12:30 on a Saturday night at a race.

It's not that these guys don't want your business but they get thousands of calls/emails from people who are not serious. I have Reed's and Brian's cell numbers in my phone and neither hesitate to help. Hell, I have never even bought anything new from Brian, just a couple of used parts off his wrecked car.

Take their actions with a grain of salt and go on.

I would just rather give these guys, any vendor, my business before dealing with the companies.

I know, that was what was strange. I see and read them help people with my own eyes, yet I guess I don't have enough money to be taken serious.
I know that Micha has a little more budget than me, but he is on a budget too.

I agree forsure,,,,, don't go to someone like Proline, Bennet etc if your on a budget.

jones wrote:I know, that was what was strange. I see and read them help people with my own eyes, yet I guess I don't have enough money to be taken serious.
I know that Micha has a little more budget than me, but he is on a budget too.

I agree forsure,,,,, don't go to someone like Proline, Bennet etc if your on a budget.

We stay on budget by learning how to do all of our own fabricating. Costs money to buy the equipment and tools but after you are finished with your stuff you can build for others to make your money back.

General guideline:



Have a good day!
Michael

Michael

Can repost or link that chart you posted? I cant zoom in on it to read it.... Looks very interesting.

8liter wrote:Michael

Can repost or link that chart you posted? I cant zoom in on it to read it.... Looks very interesting.

X2

8liter wrote:Michael

Can repost or link that chart you posted? I cant zoom in on it to read it.... Looks very interesting.

Here is a direct link:

http://i53.photobucket.com/albums/g69/96Mustang460cid/Enginecidvshpvsturbosizechart.jpg

I know the resolution is low...that's the way it downloaded. If you email me, I'll send you the jpeg and/or pdf. They're easier to zoom in with .

Have a good day!
Michael