10.32 Deck Height Billet Block

Brian Brown on January 14th 2011, 5:10 pm

LSM is working on a 10.32 deck height billet block for me at the moment. They did offer a group purchase price if four more people purchase one. I currenlty run the C&C Motorsports block, but we have our car on a serious diet at the moment. The billet block will weigh at least 30lbs lighter than the one I am currently running now, which weighs 161 pounds, but it could possibly end up almost 50lbs lighter. The guys are telling me in the 125 pound range, but possibly slightly lighter. If anyone is interested in one, please let me know asap.

Thanks,
Brian
601.218.3848
brian@quicktimemotorsports.net

I just recieved the following drawing today. The drawing itself is almost complete.

dfree383 on January 14th 2011, 5:12 pm

Nice Piece, might one inquire as to the Cost? and does it have water jackets?

Brian Brown on January 14th 2011, 5:25 pm

dfree383 wrote:Nice Piece, might one inquire as to the Cost? and does it have water jackets?

This one will be solid, even though I am still on gasoline. I'm pretty sure some small alterations to one's own block would not be that big of a deal. I'm paying $9k for this block with almost all the machine work already completed. If four more guys step up, we will be able to get them for $7k a piece. I think that is hard to beat, especially since CN quoted much much more.

bb429power on January 14th 2011, 6:24 pm

May I ask why there is a part missing between each cylinder?

AZFairlane on January 14th 2011, 6:51 pm

Because that's the aluminum block and the iron sleeves are not installed yet.

bb429power on January 14th 2011, 7:07 pm

AZFairlane wrote:Because that's the aluminum block and the iron sleeves are not installed yet.

Ahh, that explains something else I saw at the machine shop.

605FOX on January 15th 2011, 9:45 am

How big can it go ?

Brian Brown on January 15th 2011, 7:35 pm

Roughly 648 or so. You'll need a taller deck height to go bigger.

dfree383 on January 17th 2011, 3:54 pm

Thats one bad azz looking block.

jones on January 17th 2011, 3:57 pm

Does this block use the 9 cam bearings or standard setup?

605FOX on January 18th 2011, 2:53 pm

Brian Brown wrote:Roughly 648 or so. You'll need a taller deck height to go bigger.

very niece piece ....

and x2 on what Jones said ....

Frank Merkl on January 18th 2011, 7:54 pm

Here's a buddy on mine's new billet block and heads , too bad it's a chevy!!

Frank

LivermoreDave on January 18th 2011, 8:41 pm

Damn Frank, whether it's a Chevy or not, that som-bitch is to pretty to put in a car!

Dave.

The Pope on January 19th 2011, 5:47 am

LivermoreDave wrote:Damn Frank, whether it's a Chevy or not, that som-bitch is to pretty to put in a car!

Dave.

*-+10000000000000000

dfree383 on January 19th 2011, 7:05 am

Frank Merkl wrote:Here's a buddy on mine's new billet block and heads , too bad it's a chevy!!

Frank

Only thing Chevy on it is the Main Journals and transmission pattern...... If that !?!?!? Laughing

10.32 Deck Height Billet Block

10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block

Re: 10.32 Deck Height Billet Block