starting car on toilet
Page 2 of 2 • Share •
Page 2 of 2 •
1, 2
Re: starting car on toilet
So far it is a couple tenths faster than it was on gas. First test out it went 6.386, 6.385, and 6.385. Driver needs to get his $hyt together!
TJ
TJ

Tommyj466- Posts: 235
Join date: 2009-01-06
Location: Versailles Ky
Re: starting car on toilet
You'd better look and see where that 6.386 came from! 

Curt- Posts: 1680
Join date: 2009-02-08
Age: 49
Location: Henrietta, Texas but mostly on the road
Re: starting car on toilet
Curt wrote:You'd better look and see where that 6.386 came from!
I see where you are going with this.............
Carmen won the Jeg's quick deal at Indy this weekend..........can't go by the 660" because of the finish line driving but his 330" was .004 high to low all weekend. Gas will repeat too
Lem Evans- Posts: 4073
Join date: 2008-12-03
Location: Livermore , Ky

Re: starting car on toilet
its time for some M5..............

richter69- Posts: 8200
Join date: 2008-12-02
Age: 41
Location: warmin' up my pimp hand
Re: starting car on toilet
Come on Lem, I wasn't going anywhere. You always think the worst of me. 

Curt- Posts: 1680
Join date: 2009-02-08
Age: 49
Location: Henrietta, Texas but mostly on the road
Re: starting car on toilet
mind your own business Curt................

richter69- Posts: 8200
Join date: 2008-12-02
Age: 41
Location: warmin' up my pimp hand
Re: starting car on toilet
Please let me get this right........
1] someone was sitting on a toilet with a gas primer.
2] cracking a 5" butterfly
1] someone was sitting on a toilet with a gas primer.
2] cracking a 5" butterfly
Lem Evans- Posts: 4073
Join date: 2008-12-03
Location: Livermore , Ky

Re: starting car on toilet
Lem Evans wrote:Please let me get this right........
1] someone was sitting on a toilet with a gas primer.
2] cracking a 5" butterfly
lmao ....guys lets stay on topic
_________________
THXS TO ALL MY SPONSORS
www.bfevansraceparts.com
www.evansracingengines.com
JET BOAT BOB
DAN " THE STICKER MAN " HOBBS ...AKA >>>> 56TBIRD

bruno- Moderator

- Posts: 7793
Join date: 2008-12-02
Age: 39
Location: MILLBROOK , AL.

Re: starting car on toilet
they also measured their gap and did a leak check!Lem Evans wrote:Please let me get this right........
1] someone was sitting on a toilet with a gas primer.
2] cracking a 5" butterfly

cool40- BBF CONTRIBUTOR

- Posts: 3284
Join date: 2009-08-31
Age: 41
Location: south of music city
Re: starting car on toilet
carbs is too complicated..........all them jets and air bleeds and such...............

richter69- Posts: 8200
Join date: 2008-12-02
Age: 41
Location: warmin' up my pimp hand
Re: starting car on toilet
pardon me for asking.. but does the fuel swish clock wise or counter clock wise, when you start it?
and does shutting it off require charmin?
and does shutting it off require charmin?
danev2- Posts: 37
Join date: 2011-04-10
Re: starting car on toilet
danev2 wrote:pardon me for asking.. but does the fuel swish clock wise or counter clock wise, when you start it?
and does shutting it off require charmin?
It depends if you are racing North...or South of the Mason Dixon Line.
Charmin can be used, but in Georgia, many of us use a corn cob to shut the thing down.

Wheelie58- Posts: 882
Join date: 2009-08-08
Location: Alpharetta, GA

Re: starting car on toilet
Wheelie58 wrote:danev2 wrote:pardon me for asking.. but does the fuel swish clock wise or counter clock wise, when you start it?
and does shutting it off require charmin?
It depends if you are racing North...or South of the Mason Dixon Line.
Charmin can be used, but in Georgia, many of us use a corn cob to shut the thing down.

cool40- BBF CONTRIBUTOR

- Posts: 3284
Join date: 2009-08-31
Age: 41
Location: south of music city
Re: starting car on toilet
well it looks like I sort of derailed that topic.. sorry guys. Us newbies here should be more respectful...
On a sort of related note:
I run a sort of toilet on my 460 in my 67 gal.
I have an old predator carb that I've actually done well with, once you get the hang of the one screw adjustment, it's really pretty easy.
Managed to pick up some ancient schematics and drawings to the thing some years ago.
and I met old man Kendig in Fresno CA about 15 years ago.
He was the designer of the predecessor to the predator.
DV
On a sort of related note:
I run a sort of toilet on my 460 in my 67 gal.
I have an old predator carb that I've actually done well with, once you get the hang of the one screw adjustment, it's really pretty easy.
Managed to pick up some ancient schematics and drawings to the thing some years ago.
and I met old man Kendig in Fresno CA about 15 years ago.
He was the designer of the predecessor to the predator.
DV
danev2- Posts: 37
Join date: 2011-04-10
Page 2 of 2 •
1, 2
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum