C6 Builders in Seattle?
C6 Builders in Seattle?
georgels September 27th 2012, 12:05 pm
Where can I get my C6 upgraded and built so it can handle 600 ft-lbs of torque? The transmission is out of a 1978 F-250 with 460. Could I possibly build it at home to save a buck? I have zero transmission knowledge. Thanks!
georgels- Posts : 27
Join date : 2012-06-29
Age : 25
Location : Washington
georgels- Posts : 27
Join date : 2012-06-29
Age : 25
Location : Washington
Re: C6 Builders in Seattle?
dfree383 October 1st 2012, 10:53 am
You won't need to do a whole lot to it for that.
Typical high quality rebuild and a good shift kit and a few little mods will be it.
Typical high quality rebuild and a good shift kit and a few little mods will be it.
dfree383- BBF CONTRIBUTOR
- Posts : 14370
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: C6 Builders in Seattle?
bosshoss October 1st 2012, 10:53 am
I think Gary Eriksen (Super Street Racer out of southern WA or Northern Ore) ran the C6 in his race cars for years. Don't have contact info but for sure the guys at Oregon Cam grinding know him.
dkp
dkp
bosshoss- BBF CONTRIBUTOR
- Posts : 494
Join date : 2009-08-10
Re: C6 Builders in Seattle?
NO FAIR October 1st 2012, 10:11 pm
Dukes transmission in Burien or Village transmission in North Seattle.
Dave
Dave
NO FAIR- Posts : 138
Join date : 2009-07-11
Age : 53
Location : Auburn,Wa
Re: C6 Builders in Seattle?
georgels October 30th 2012, 4:26 am
What about a little over 700ft-lbs/650hp? Want to make it less of a hp sucker. What do I need? Oversized sprags, ugraded pressure regulator, reverse boost valve?
georgels- Posts : 27
Join date : 2012-06-29
Age : 25
Location : Washington
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum