BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

intake off to INDUCTION-SOLUTIONS

+12
Barney
bbf-falcon
Nevs
IcallhimGeorge
D. Sea
studly
605FOX
Induction-Solutions
nuclearcobra
bigjohn2007
77f150
bruno
16 posters

Page 2 of 2 Previous  1, 2

Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  bbf-falcon January 25th 2010, 1:04 pm

Its very nice of the vendors we have on this site to share their knowledge, and help when we need them. Thanks to All cheers

bbf-falcon

Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  bigjohn2007 January 25th 2010, 9:17 pm

Induction-Solutions wrote:It's looking like she's ready to head back to ya Nick... After sharing a few things with you guys we found we finished up things and made all the corrections. Here's a little look at the finished product...

Front...

intake off to  INDUCTION-SOLUTIONS - Page 2 FinishedFront

Left side...

intake off to  INDUCTION-SOLUTIONS - Page 2 Finishedleft

Right sde...

intake off to  INDUCTION-SOLUTIONS - Page 2 FinishedRight

Here's how we wire many, we put a ground lug on the intake, and pig tail a hot back for each system...

intake off to  INDUCTION-SOLUTIONS - Page 2 Wired

Hope you guys like what we did.. Thanks, Steve
looks good
bigjohn2007
bigjohn2007
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 790
Join date : 2009-08-19
Age : 43
Location : Cerro Gordo n.c

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Induction-Solutions January 26th 2010, 10:21 pm

bbf-falcon wrote:Its very nice of the vendors we have on this site to share their knowledge, and help when we need them. Thanks to All cheers

Your welcome !! thanks, Steve

_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions
Induction-Solutions
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 314
Join date : 2009-08-27
Age : 58
Location : Brooksville, Florida

http://www.InductionSolutions.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Nevs January 26th 2010, 10:26 pm

bbf-falcon wrote:Its very nice of the vendors we have on this site to share their knowledge, and help when we need them. Thanks to All cheers

X2. Not everyone would do what the guys on here do. Very Cool Exclamation
Nevs
Nevs
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 2724
Join date : 2009-02-07
Age : 68
Location : NW Iowa(Odebolt)

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  bruno May 1st 2010, 2:42 pm

bump for Jeremiah

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno
bruno
Moderator
Moderator

Posts : 10849
Join date : 2008-12-02
Age : 49
Location : MILLBROOK , AL.

http://WWW.CKRME.COM

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  bruno January 28th 2012, 11:07 am

bump for BLACKFOX

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno
bruno
Moderator
Moderator

Posts : 10849
Join date : 2008-12-02
Age : 49
Location : MILLBROOK , AL.

http://WWW.CKRME.COM

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Induction-Solutions February 8th 2012, 12:31 pm

Nick,
Thanks for bumping this.. I was looking for something like this for an example the other day.. Thanks, SJ

_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions
Induction-Solutions
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 314
Join date : 2009-08-27
Age : 58
Location : Brooksville, Florida

http://www.InductionSolutions.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  bruno April 6th 2012, 6:29 am

bump for Greg

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno
bruno
Moderator
Moderator

Posts : 10849
Join date : 2008-12-02
Age : 49
Location : MILLBROOK , AL.

http://WWW.CKRME.COM

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Induction-Solutions August 20th 2012, 3:57 pm

Here's a plate system we were just going thru.. I thought this was a set up.. Shocked



https://www.youtube.com/watch?v=W3b_3xJyF2Y&list=UUN6fgdOeWEpE62rECt61pYQ&index=1&feature=plcp


Thanks, SJ

_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions
Induction-Solutions
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 314
Join date : 2009-08-27
Age : 58
Location : Brooksville, Florida

http://www.InductionSolutions.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Barney August 20th 2012, 5:17 pm

Ughhhh....
Barney
Barney

Posts : 2577
Join date : 2009-12-02
Age : 46
Location : Kirkland, Il

http://www.hdraracingseries.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  richter69 August 20th 2012, 5:29 pm

my bs plate I got from snake this winter did that, it ran ok w a 75 jet, I put an 80 in it and it left hard then laid over...............I took it off and flowed it and it did exactly what the one in the video did.

The Black Widow plate works like a mofo .............. Wink
richter69
richter69

Posts : 13649
Join date : 2008-12-02
Age : 51
Location : In the winners circle

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  IDT-572 August 20th 2012, 6:00 pm

richter69 wrote:my bs plate I got from snake this winter did that, it ran ok w a 75 jet, I put an 80 in it and it left hard then laid over...............I took it off and flowed it and it did exactly what the one in the video did.

The Black Widow plate works like a mofo .............. Wink

I had two of those one I sent to you and one I sent to Steve to be flowed mine did the same thing when Steve flowed it.

I'm not sure what plate Steve sent me, I think it was an Edelbrock. It works good enough that I couldn't hook it at 130 mph. Shocked Laughing
IDT-572
IDT-572
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 4628
Join date : 2008-12-02
Age : 61
Location : Shelbyville Tn.

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  richter69 August 20th 2012, 6:04 pm

I got a big shot plate from him to replace it at the time.................worked great.
richter69
richter69

Posts : 13649
Join date : 2008-12-02
Age : 51
Location : In the winners circle

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Induction-Solutions September 12th 2012, 11:04 am

Just when you think you've seen it all !!! LOL Doing a blueprint and flow and here's what we find...



In the plate....

intake off to  INDUCTION-SOLUTIONS - Page 2 Buginplate


In the fitting..

intake off to  INDUCTION-SOLUTIONS - Page 2 Buginfuelfitting

At last...

intake off to  INDUCTION-SOLUTIONS - Page 2 Buginfuel


Pretty crazy some of the things we find in these parts.. thanks, SJ

_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions
Induction-Solutions
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 314
Join date : 2009-08-27
Age : 58
Location : Brooksville, Florida

http://www.InductionSolutions.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  yellowhorse7 September 12th 2012, 6:44 pm

Shocked Shocked
yellowhorse7
yellowhorse7

Posts : 1382
Join date : 2009-11-16
Age : 96
Location : Polk County

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  richter69 September 12th 2012, 7:10 pm

as often as some make it to the track I'm not surprised......... Wink

btw Steve got a buddy here that will be in contact next week about a 4150 Sledgehammer for a sbc........ Very Happy
richter69
richter69

Posts : 13649
Join date : 2008-12-02
Age : 51
Location : In the winners circle

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Induction-Solutions October 8th 2012, 1:08 pm

richter69 wrote:as often as some make it to the track I'm not surprised......... Wink

btw Steve got a buddy here that will be in contact next week about a 4150 Sledgehammer for a sbc........ Very Happy

That would be great.. Got a couple built in stock now too.. Thanks, SJ

_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions
Induction-Solutions
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 314
Join date : 2009-08-27
Age : 58
Location : Brooksville, Florida

http://www.InductionSolutions.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  richter69 October 8th 2012, 1:26 pm

he got sidetracked as usual but he will be getting one soon, I wont let him buy anything else lol.
richter69
richter69

Posts : 13649
Join date : 2008-12-02
Age : 51
Location : In the winners circle

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Induction-Solutions October 9th 2012, 9:42 am

Not a problem.. We'll be here.. Thanks, SJ

_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions
Induction-Solutions
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 314
Join date : 2009-08-27
Age : 58
Location : Brooksville, Florida

http://www.InductionSolutions.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  nitrous.f October 15th 2012, 8:12 pm

after reading this post about how steve is showing us the difference in line size and orfince size i will not even by nos system until i talk to him! man he really educated me so much iam scared to by a system from any body but steve! thank GOD i seen this it made my day! thanks steve for posting that it was very interesting! hey steve i just read the new hot rod mag and i was tripping when i seen you in the 1992 fastest street car shootout! firebird on the bottle! great job! Shocked
nitrous.f
nitrous.f

Posts : 293
Join date : 2011-06-05

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  Induction-Solutions October 16th 2012, 3:31 pm

nitrous.f wrote:after reading this post about how steve is showing us the difference in line size and orfince size i will not even by nos system until i talk to him! man he really educated me so much iam scared to by a system from any body but steve! thank GOD i seen this it made my day! thanks steve for posting that it was very interesting! hey steve i just read the new hot rod mag and i was tripping when i seen you in the 1992 fastest street car shootout! firebird on the bottle! great job! Shocked

Thanks for taking a look thru this thread as well as seeing some of the things that can happen.. The latest Hot Rod mag was pretty cool to see as well.Here's a shot on a qualifying run from that race too..

intake off to  INDUCTION-SOLUTIONS - Page 2 Memphis92-2

Hope you enjoy.. Thanks, SJ

_________________
Steve Johnson
Induction Solutions
16121 Flight Path Dr.
Brooksville, Fl. 34604
Shop 352-593-5900
Cell 815-341-8853
www.InductionSolutions.com
Induction-Solutions
Induction-Solutions
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 314
Join date : 2009-08-27
Age : 58
Location : Brooksville, Florida

http://www.InductionSolutions.com

Back to top Go down

intake off to  INDUCTION-SOLUTIONS - Page 2 Empty Re: intake off to INDUCTION-SOLUTIONS

Post  bruno March 29th 2022, 1:24 pm

Bump for an old thread ... dont forget about Induction-Solutions for all your nitrous needs !!

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno
bruno
Moderator
Moderator

Posts : 10849
Join date : 2008-12-02
Age : 49
Location : MILLBROOK , AL.

http://WWW.CKRME.COM

1982GT likes this post

Back to top Go down

Page 2 of 2 Previous  1, 2

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum