460 d3 heads
Page 1 of 1
460 d3 heads
80hatchstang January 29th 2023, 4:09 pm
Set of Ford 460 d3 heads. Less than 1,000 miles on them.
Pedestals cut down, screw in studs and guide plates installed.
Comp 924-16 valve springs, locks and retainers.
Ferrea 6000 competition valves.
2.19 intake/ 1.71 exhaust
Swapped out to aluminum heads so no longer need.
$500
Pedestals cut down, screw in studs and guide plates installed.
Comp 924-16 valve springs, locks and retainers.
Ferrea 6000 competition valves.
2.19 intake/ 1.71 exhaust
Swapped out to aluminum heads so no longer need.
$500
80hatchstang- Posts : 8
Join date : 2012-02-20
dfree383 likes this post
Similar topics» Wanted..... Cast iron Blue thunder Ford port heads or CJ heads
» FS: New set of Ford M-6049-SCJA aluminum cylinder heads.. HEADS SOLD, Thx
» More power outta 460 with good alum heads or stroker with iron heads?
» "Bolt On" 460 aluminum heads? Existing engine, thinking about new heads.
» will a piston made for A460 heads work with C460 heads?
» FS: New set of Ford M-6049-SCJA aluminum cylinder heads.. HEADS SOLD, Thx
» More power outta 460 with good alum heads or stroker with iron heads?
» "Bolt On" 460 aluminum heads? Existing engine, thinking about new heads.
» will a piston made for A460 heads work with C460 heads?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum