Solid roller on the street
+4
supervel45
nedceifus
ED468
rmcomprandy
8 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: Solid roller on the street
Sorry 80CapriBigBlock, I did not see that. I sent you a PM back
64galaxie- Posts : 28
Join date : 2017-11-05
80CapriBigBlock likes this post
Re: Solid roller on the street
dfree383 wrote:64galaxie wrote:I’m taking a gamble and bought this cam.
https://www.jegs.com/i/COMP-Cams/249/34-773-9/10002/-1
That’s a safe shelf cam, just make sure to use some better springs then the 954-16’s
And don’t use the cheap comp lifters. Get some Bushed Morels or Crowers, they are not cheap but much better parts for a longer service life
FWIW i've been using the Comp Solid Roller Lifters but have changed them once or twice and have a new set now i might change this winter i haven't had any problems with them!!Although i don't drive my car much and haven't raced it since probably 2012 but do drive it on the street!!
Mark Miller- Posts : 1948
Join date : 2009-09-01
ED468 likes this post
Page 2 of 2 • 1, 2
Similar topics
» street solid roller cam
» Solid Roller for Street/Strip duty ???
» Who runs solid lifter (non-roller) cams on the street? Is this cam too big?
» hydraulic roller cam with solid roller lifters
» Using Hydraulic roller lifters on the Comp XR292 R-10 Xtreme Energy Solid Roller cam?
» Solid Roller for Street/Strip duty ???
» Who runs solid lifter (non-roller) cams on the street? Is this cam too big?
» hydraulic roller cam with solid roller lifters
» Using Hydraulic roller lifters on the Comp XR292 R-10 Xtreme Energy Solid Roller cam?
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|