460 Flat Top or Dome Pistons
4 posters
Page 1 of 1
460 Flat Top or Dome Pistons
Hi, iam looking for a New or Good Used Set of 4.390 or 4.400 Dome pistons for a Conventional Head with a 3.850 stock stroke and 6.605 rod length with a optional pin size. What do you have ?
Last edited by 80CapriBigBlock on November 5th 2024, 6:59 pm; edited 3 times in total
80CapriBigBlock- Posts : 21
Join date : 2024-06-30
Age : 57
Location : Metro Detroit
Re: 460 Flat Top or Dome Pistons
Got that in a 429: New/not run BME 429 forged pistons, for 4.39" bore, ~0.030" dome, standard Cobra Jet valve layout, 1/16" ring set, 0.975" pins, on bronze bushed & re-sized D6VE rods.80CapriBigBlock wrote:Hi, iam looking for a new or good used set of 4.390 or 4.400 Dome pistons for 3.850 stock stroke and 6.605 rod length with a optional pin size. What do you have ?
Re: 460 Flat Top or Dome Pistons
80CapriBigBlock wrote:Hi, iam looking for a new or good used set of 4.390 or 4.400 Dome pistons for 3.850 stock stroke and 6.605 rod length with a optional pin size. What do you have ?
My cousin has some IIRC TRW Dome .030 Over for use with stock 3.85 Stroke and 6.605 rod length they are on Eagle H-Beam 6.605" Rods!! But they're in an assembled short block that has been ran before not sure if he would want to sell them or not!!If you don't find anything let me know and i could ask him
Mark Miller- Posts : 1959
Join date : 2009-09-01
80CapriBigBlock likes this post
Re: 460 Flat Top or Dome Pistons
Sent you a PM Mark.
80CapriBigBlock- Posts : 21
Join date : 2024-06-30
Age : 57
Location : Metro Detroit
Re: 460 Flat Top or Dome Pistons
80CapriBigBlock wrote:Sent you a PM Mark.
I sent you a reply let me know if if got it!!
Mark Miller- Posts : 1959
Join date : 2009-09-01
Re: 460 Flat Top or Dome Pistons
STILL LOOKING !
80CapriBigBlock- Posts : 21
Join date : 2024-06-30
Age : 57
Location : Metro Detroit
FordPriest likes this post
Re: 460 Flat Top or Dome Pistons
I have a set of 460 Bill Miller High Dome Pistons. Check pm !!
FordPriest- Posts : 6
Join date : 2024-03-17
Re: 460 Flat Top or Dome Pistons
Iam Still Looking for 460 pin height pistons in a dome. .030-.040-.060-.080 oversize. New or Good Used.. What do you have ??
80CapriBigBlock- Posts : 21
Join date : 2024-06-30
Age : 57
Location : Metro Detroit
Re: 460 Flat Top or Dome Pistons
Been Looking and Still Looking !! What do you have before i purchase them from a store ??
80CapriBigBlock- Posts : 21
Join date : 2024-06-30
Age : 57
Location : Metro Detroit
Re: 460 Flat Top or Dome Pistons
Iam open to Flat Tops now in the same configuration as posted at the top of this page. What do we have out there ??
80CapriBigBlock- Posts : 21
Join date : 2024-06-30
Age : 57
Location : Metro Detroit
Similar topics
» Dome pistons for a 460
» Dome pistons for 460?
» FT or dome pistons for 545
» WTB 532 Dome Pistons
» need a set of dome pistons
» Dome pistons for 460?
» FT or dome pistons for 545
» WTB 532 Dome Pistons
» need a set of dome pistons
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum