BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

TFS A heads with intake and cam all complete ready to run

4 posters

Go down

TFS A heads with intake and cam all complete ready to run Empty TFS A heads with intake and cam all complete ready to run

Post  jesse September 19th 2010, 12:49 pm

heads are older they have tfs casted on the heads ends
they have triple springs
i belive the vales are int 2.35
exh 1.95
rockers are comp stainless h-11 i belive they are not the cheap ones
smithbrothers push rods 1.20 wall
just had a performace valve job about 12 runs ago
every thing on thease heads have less than 40 runs abd never seen over 7800 rpm's
nothing is wrong with them i am just going a differnt rout
motor is still running if you want to see and hear in person
they also have comp cams girtal
if you buy today or have a m/o on the way by tomorro i will thro the intake in
it is a older single plane but has had the runners welded for bigger runners
and i will toss in a comp cam cam that lem had done for me
i am not shure the size but lift is around 800
it works awsome you can hear this combo run if you go to youtube and typ in rockvill 09
items are located in minnesota
price is 1,600 firm
o yea and head studs come with them
call me asap i do not have internet anymore
due to my computer is broke i am at my dads useing his computer so i have no way to post pics
but trust me this is on hell of a deal i have sold on here befor and i am shure a few will vouch for me
my number is
320-632-0023
thanxs jesse
jesse
jesse

Posts : 447
Join date : 2009-03-18
Age : 44
Location : little falls, mn

Back to top Go down

TFS A heads with intake and cam all complete ready to run Empty Re: TFS A heads with intake and cam all complete ready to run

Post  jesse September 19th 2010, 12:52 pm

i forgot to mention
heads and intake are fully ported
shannons engineering here in minnesota
i lost the flow sheets but they flowed some were around around mid 400's int
exh i dont rember at all but they are good avarge for thease heads
jesse
jesse

Posts : 447
Join date : 2009-03-18
Age : 44
Location : little falls, mn

Back to top Go down

TFS A heads with intake and cam all complete ready to run Empty Re: TFS A heads with intake and cam all complete ready to run

Post  Curt September 19th 2010, 1:01 pm

Sounds like an awesome deal for someone. Wish I was building a backup motor.
Curt
Curt

Posts : 2787
Join date : 2009-02-08
Age : 61
Location : Henrietta, Texas but mostly on the road

Back to top Go down

TFS A heads with intake and cam all complete ready to run Empty Re: TFS A heads with intake and cam all complete ready to run

Post  Nevs September 19th 2010, 1:04 pm

No worries with Jesse, he's legit.
Nevs
Nevs
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 2724
Join date : 2009-02-07
Age : 70
Location : NW Iowa(Odebolt)

Back to top Go down

TFS A heads with intake and cam all complete ready to run Empty Re: TFS A heads with intake and cam all complete ready to run

Post  jesse September 19th 2010, 1:58 pm

sale pending
jesse
jesse

Posts : 447
Join date : 2009-03-18
Age : 44
Location : little falls, mn

Back to top Go down

TFS A heads with intake and cam all complete ready to run Empty Re: TFS A heads with intake and cam all complete ready to run

Post  outlawbird September 22nd 2010, 6:24 pm

Did they sale?

Thanks Brandon.
outlawbird
outlawbird

Posts : 27
Join date : 2010-09-22
Age : 44
Location : Shenandoah VA

Back to top Go down

TFS A heads with intake and cam all complete ready to run Empty Re: TFS A heads with intake and cam all complete ready to run

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum