1980 Mercury Zephyr Pro Street BBF

Well after being burnt out from tire kickers, picture collectors, low ballers, and no shows my brother decided to try to sell his Zephyr again.

For sale is my brothers 1980 Mercury Zephyr that has been back halfed with 31/18.50/15 tires. It has a fresh 460 (bored .60 over) with a performer rpm intake, mallory unilite distributor, hooker headers, ford motorsport motor mounts and taylor wires. The transmission is a fresh c6 with tci shift kit and a b&m rachet shifter. The rear end is a narrowed 9 inch 4.56 gears with adj coil overs. The car is completely street legal with a title. She is clean inside and out. This car is completely street legal with working lights horn, turn signals, radio, carpet, front, back seats,mufflers, and headliner. $6500 firm
Call my brother Joel at 618 315 8557 if interested.
Thanks

Are the wheel openings stretched? If so, how much?

I like it but already have one. Just curious about how much I need to stretch the openings.

jbozzelle wrote:Are the wheel openings stretched? If so, how much?

I like it but already have one. Just curious about how much I need to stretch the openings.

I honestly cant remember how much they have been stretched. So give me the measurements of yours (if still stock) and I can figure out how much they've been stretched.
Justin

I'll measure this week and let you know.

I had to stretch mine 8 inches.all to the backside

jcoxracing wrote:

jbozzelle wrote:Are the wheel openings stretched? If so, how much?

I like it but already have one. Just curious about how much I need to stretch the openings.

I honestly cant remember how much they have been stretched. So give me the measurements of yours (if still stock) and I can figure out how much they've been stretched.
Justin

I measuring back from the door jamb to the front of the wheel opening is 17 inches. From the door jamb to the rear of the opening is 42 inches. What you got on the Zephyr?

Thanks!

jcoxracing wrote:Well after being burnt out from tire kickers, picture collectors, low ballers, and no shows my brother decided to try to sell his Zephyr again.

For sale is my brothers 1980 Mercury Zephyr that has been back halfed with 31/18.50/15 tires. It has a fresh 460 (bored .60 over) with a performer rpm intake, mallory unilite distributor, hooker headers, ford motorsport motor mounts and taylor wires. The transmission is a fresh c6 with tci shift kit and a b&m rachet shifter. The rear end is a narrowed 9 inch 4.56 gears with adj coil overs. The car is completely street legal with a title. She is clean inside and out. This car is completely street legal with working lights horn, turn signals, radio, carpet, front, back seats,mufflers, and headliner. $6500 firm
Call my brother Joel at 618 315 8557 if interested.
Thanks

Is that a am/fm 8track in it hadn't seen one of them in years

how much as a roller

iI might be interested, less motor if you are willing to seperate. Don't blame ya if ya stick to the $6500. looks like its worth every penny.

This is a great deal for someone on a budget.

Where is this car located? I'm in California.

jbozzelle wrote:

jcoxracing wrote:

jbozzelle wrote:Are the wheel openings stretched? If so, how much?

I like it but already have one. Just curious about how much I need to stretch the openings.

I honestly cant remember how much they have been stretched. So give me the measurements of yours (if still stock) and I can figure out how much they've been stretched.
Justin

I measuring back from the door jamb to the front of the wheel opening is 17 inches. From the door jamb to the rear of the opening is 42 inches. What you got on the Zephyr?

Thanks!

Okay I finally remembered to measure the wheel wells on my brothers car. From the back of the door jam to the front of the wheel opening is 15 inches and from the door jam to the rear of the opening is 48 inches. So it looks like it was stretched about 8 inches total. Sorry again for taking soo long to respond.
Justin

CDMBill wrote:Where is this car located? I'm in California.

The car is located in Fillmore, IL 62032.
My brother doesn't really want to sell it as a roller, so $5500 as a roller is firm.
Justin