scj flow numbers

Any one have the flow number off hand for the cast head thank you Jason.

FRRP's Scj 340-350CFM??somewhere around there.P51's 400cfm out of the box.

Thank you AL went by the old play box and all the info is gone. I think i have my combo nailed down. Way big down size but i hope to still put down 1000hp with a little room to grow.

Here's the flow numbers from Randy Malik's 2008 EMC motor.
Cylinder Head Flows, Averaged all 8 =
INTAKE
.100" 72.3
.200" 165.1
.300" 253.4
.400" 331.8
.500" 383.2
.600" 404.8
.700" 399.6

EXHAUST (no pipe)
.100" 55.5
.200" 107.5
.300" 144.3
.400" 175.1
.500" 204.4
.600" 228.0
.700" 239.8

They are cheap right now. Thats for sure. Reason being, I think is everyone wants P-51's now.

Since you dont have any restrictions interfering with the chassis and ports/etc. Why dont you just buy a set of used A-heads? Then there is no exhaust port comprimizes. Not they are a bad head or anything like that. Could have bought a used set of A's this spring complete for $2,500 this Spring. Deals are out there.

yea i hear you on that i just have to get something going thats not going to brake the bank to put a whooppen on the chevy boys. I keep get the call out so it time to start building.

yea it driving me crazy i have even thought about the KB and the $350 ohio crank and cheap rods and my d3 heads and try for the 850-900hp