SCJ heads and parts for sale
Page 1 of 3 • Share •
Page 1 of 3 • 1, 2, 3 
SCJ heads and parts for sale
Tennessee Bullitt on July 19th 2011, 8:41 pm
I am going to put up my stuff from my 521 SCJ motor. I have plans for my new build so I am just listing early in case anyone is interested. I will be breaking down the engine soon. I will post up prices and pics later, here is the list.
SCJ heads with some home port work done to them. Springs, cups, locks, retainers that came with the heads for a flat tappet.
$1100 SOLD........
Lunati springs, locks, retainers and comp cups, these are what I installed this year. It's good to very close to .700 lift flat tappet.
Lunati custom solid cam, 268/279 .682/.645 lift 111LSA and direct oil feed lifters very little run time.
$400
Pushrods for the SCJ heads, 2 were replaced and have 2 extra 1 intake 1 exhaust. $50 SOLD...........
Weiand tunnel ram with some port work, the roof raised. $75
Summit racing street scoop for dual carbs, smooth top $75
D&D fox swap headders, silicone temp paint, has some dings, 2 1/8 primaries with a reducer from 3 1/2 to 3 exhaust $300...... SOLD
SCJ/P51 Probe SRS -3cc flat top pistons $300
Scat 6.8 h-beam rods with 8740 rod bolts $ 300
comp 260 h magnum camshaft [new in box] $50
professionl products 4 port regulator with -6 pushloc hose and fittings $ 150
holley hp150 fuel pump and big end race fuel filter with 100 micron stainless element $150....... SOLD
-8 pushloc hose with fittings about 18ft $40
arp head studs 12 pt for SCJ/Blue thunder heads $ 100
Jomar stud griddle for SCJ/P-51 heads, bought this about 2 1/2 months ago, added grade 8 bolts. $125....... SOLD
endrel linkage for T/R $50
There might be some more stuff, need to check for ya. More updates coming. all prices are plus shipping.
SCJ heads with some home port work done to them. Springs, cups, locks, retainers that came with the heads for a flat tappet.
$1100 SOLD........
Lunati springs, locks, retainers and comp cups, these are what I installed this year. It's good to very close to .700 lift flat tappet.
Lunati custom solid cam, 268/279 .682/.645 lift 111LSA and direct oil feed lifters very little run time.
$400
Pushrods for the SCJ heads, 2 were replaced and have 2 extra 1 intake 1 exhaust. $50 SOLD...........
Weiand tunnel ram with some port work, the roof raised. $75
Summit racing street scoop for dual carbs, smooth top $75
D&D fox swap headders, silicone temp paint, has some dings, 2 1/8 primaries with a reducer from 3 1/2 to 3 exhaust $300...... SOLD
SCJ/P51 Probe SRS -3cc flat top pistons $300
Scat 6.8 h-beam rods with 8740 rod bolts $ 300
comp 260 h magnum camshaft [new in box] $50
professionl products 4 port regulator with -6 pushloc hose and fittings $ 150
holley hp150 fuel pump and big end race fuel filter with 100 micron stainless element $150....... SOLD
-8 pushloc hose with fittings about 18ft $40
arp head studs 12 pt for SCJ/Blue thunder heads $ 100
Jomar stud griddle for SCJ/P-51 heads, bought this about 2 1/2 months ago, added grade 8 bolts. $125....... SOLD
endrel linkage for T/R $50
There might be some more stuff, need to check for ya. More updates coming. all prices are plus shipping.
Last edited by Tennessee Bullitt on September 10th 2011, 5:17 am; edited 7 times in total (Reason for editing : keep forgetting stuff)
Tennessee Bullitt- Posts: 525
Join date: 2009-08-25
Location: Ft Knox 
Re: SCJ heads and parts for sale
Tennessee Bullitt on July 21st 2011, 6:26 am
I have posted the prices and I will answer everyone in the order which they came. Thanks guys.
Tennessee Bullitt- Posts: 525
Join date: 2009-08-25
Location: Ft Knox -
Re: SCJ heads and parts for sale
Mr. on July 21st 2011, 8:20 am
Let me know if I am first in line for the heads and headers. Price looks right. Pushrods too. 
Thanks,
Fred
Thanks,
Fred
Mr.- Posts: 6
Join date: 2011-06-26 -
Re: SCJ heads and parts for sale
stonecoldtx on July 21st 2011, 3:40 pm
Tennessee Bullitt wrote:I have posted the prices and I will answer everyone in the order which they came. Thanks guys.
You never responded to my PM . . .
stonecoldtx- Posts: 4
Join date: 2011-07-07
Age: 42
Location: Dallas, TX -
Re: SCJ heads and parts for sale
Tennessee Bullitt on July 21st 2011, 5:22 pm
PM'S replied to. I will start getting pics this weekend as I have a contractor job now so I am sort of limited to real early in the mornig or in the evening. I am trying to keep everyone updated as quick as possible.
Tennessee Bullitt- Posts: 525
Join date: 2009-08-25
Location: Ft Knox -
Re: SCJ heads and parts for sale
83-88T-Bird Guy on July 22nd 2011, 5:58 pm
Put me inline for the D&D headers if the guy before me doesn't want them.
Interested in the Jomar Stud girdle for the SCJ heads and head studs as well.
Thanks
Interested in the Jomar Stud girdle for the SCJ heads and head studs as well.
Thanks
83-88T-Bird Guy- Posts: 643
Join date: 2008-12-03
Age: 99
Location: Bardstown, KY -
Re: SCJ heads and parts for sale
Tennessee Bullitt on July 24th 2011, 9:08 pm
I had left my 12pt socket at work so I couldn't get them off the block. One of the threads was tapped out for the next size up. I had forgot to mention this, nothing wrong it will still take a bolt no problem through the manifold. As soon as I can get these off I can have some pics of them cleaned up.
Tennessee Bullitt- Posts: 525
Join date: 2009-08-25
Location: Ft Knox -
Re: SCJ heads and parts for sale
Tennessee Bullitt on July 24th 2011, 9:34 pm
Some of the other stuff...
Tennessee Bullitt- Posts: 525
Join date: 2009-08-25
Location: Ft Knox -
Re: SCJ heads and parts for sale
Tennessee Bullitt on July 25th 2011, 6:47 pm
surprised no one wants the pistons. 
Tennessee Bullitt- Posts: 525
Join date: 2009-08-25
Location: Ft Knox -
Re: SCJ heads and parts for sale
richter69 on July 25th 2011, 8:29 pm
I'd prolly be interested in them, but I'm a broke mf'er right now lol
richter69- Posts: 8192
Join date: 2008-12-02
Age: 41
Location: warmin' up my pimp hand -
Page 1 of 3 • 1, 2, 3
Page 1 of 3
Permissions in this forum:
You cannot reply to topics in this forum