Top-end off my 523 testing waters for possible sale Possible sale of complete engine!

TFS Powerport 290 (Streets) TFS-53400002

TFS Trackheat intake 53400111 (4150 flange)

TFS black cast valve covers TFS-53411802

Harland Sharp CSP-S4005

Probe SG-460 rocker stud girdle

Howard's Solid roller cam 241133-10 258/268*@.050" .692/.692" lift 110lsa

Howards Solid roller lifters 91247

Howards Pro-Alloy Mechanical Roller Springs 1.55",.815, 230@1.88, 550@1.250, 508 , 1.080 .750

QuickFuel QFT-Q-1050

ARP-155-3603

TFS-21419500-8 (2 sets)

I would like to sell this complete and not split anything up. I am asking $3500 for everything and I will pay shipping if needed but much prefer pick-up. This top-end has gone 10.533@129.29 on my 11:1 523 in my 3550# Ranger. These parts have ~35 passes and maybe 20 street miles. If I cannot sell this I will have them ported and run these heads again next year.

Please call Eric Millard 1-608-931-4293 10am-9pm CST

Only reason for possible sale is wanting to upgrade to A460 heads and intake.

Eric I want a set of them tfs heads for mine just can't afford them right now or anytime in the near future I didn't see anything on the your intake you going to sale it to ,don't forget the A 460 heads you got to have the A 460 intake too.

Oops I better add that too, this price is for everything from the cam up to the carb. A guy could literally pull all this stuff out the boxes/crates and bolt everything on and be making 600+hp with a decent lower-end.

I also forgot to add the stud girdle in original add I just added that.

Come on guys, Horsepower TV made 630 with these heads with smaller cam, carb and a dual plane intake on a bonestock 460 shortblock.

This is a complete combo minus gaskets.

i seen erics truck run at byron last week. makes me jealous! bobn

Thanks Bob nice work on your car as well!

There is ~$5000 invested in these parts this is a smoking hot deal that is already a proven combo.

10.533@129.29 in a #3550 2000 Ford Ranger with too tight of a converter.

I am willing to sell the combo minus carb for $3000.00 and I will sell the carb separately. This intake can easily be converted to a dominator flange. Price includes shipping to anywhere in continental 48 states.

TTT I would be willing to trade the complete topend kit straight across for a pair of brand new in the box A460 heads part number TFS-5451T802-M87. I know not likely but that is what I am trying to sell these to upgrade to.

Bumpity bump!

Racing season is over and this will be coming apart soon so it's time to go!!!!!

I'd be interested in just the heads....no springs, rockers, etc. Just the heads

Not gonna seperate anything at this point except maybe the carb from the package. Thanks though! If this don't sell like this I will be having Rich port them, then the carb cam and lifters and intake will be up for sale seperately, and the pistons as well as I will be going to flattops.

PS it was nice meeting you at the Powered By Ford race.

Still available!

You let me know when you want to sell just the heads.......

TTT

I am thinking of building a complete new engine and thinking of selling this one but I may have some options as far as pricing;

1. The complete engine air cleaner to pan $6500+ shipping as it sits

2. The engine freshened with new bearing, gaskets... $7250+ shipping

3. Complete engine freshened with new bearings, gaskets..., and dynoed for $8000+ shipping (there will not be any upgrades of parts basically just doing the dynoing to verify hp and optimise tune)

The engine has ~30 passes on it (never been spun higher than 7600rpm's) and never overheated and about 25 street miles on it, but currently has a crank seal leak which will be fixed regardless of which option is chosen.

The lower-end consists of Scat 4340 forged crank 4.300" stroke and Scat 4340 H-beam rods 6.800" with Probe +.040 over 22cc dished piston .003" below deck with 11.02:1 compression with the 74cc heads.

Parts can swapped on this for $25/hr + cost of parts (unless the work needs to farmed out).

For options 2 or 3 I will require a $1500 non- refundable deposit.

Thanks for looking!!!

PS all reciepts from original purchases will be included along with machining reciepts.

I hope noone gets confused the top-end kit is still for sale seperatley just had a few people asking about the complete engine. If I sell just the top-end I can base my next motor on this short block with a piston swap.

PS I am not nor will I part any of this out!!! I am selling either the top-end kit or the complete engine if you want certain parts buy the complete engine for $6500 and you can sell the parts you don't want, so don't ask!!!

Bumpity bump !

Can be shipped by Monday afternoon!

Will be at the shop all day either the top end kit or complete engine can be shipped today if call before noon with payment.

I will sell the top-end kit with the carb for $3000 if buyer pays shipping which will be ~$170 insured for $5000 which would very wise as the parts would cost more than that to replace. This is my absolute bottom dollar on the top-end kit, or $6500 as it sits for complete engine is the bottom dollar. Thank you.

Bump!

TTT

Been getting too much run around about this deal so I am not selling it as stated will be selling some parts in a new auction. Thank you!