FORD Motor Sports A460 Heads
4 posters
Page 1 of 1
FORD Motor Sports A460 Heads
powerstrokeace September 29th 2011, 2:08 pm
I looking to sell these heads that came on a turn key dragster that I bought last year. I really have no information other thatn they are ported. Don't know by who or the flow numbers. I was told that they have the 2.40 intake valve. I'm looking to get these off in the next week and taking them to my local guy to check them over and flow test on chamber and cc one chamber as well. I have a chance to get a new set (TFS) for a great price. These will come complete with guide plates and studs. I guessing $1800 and you pay shipping.
Ace
Ace
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: FORD Motor Sports A460 Heads
powerstrokeace September 29th 2011, 8:40 pm
deleted
Last edited by powerstrokeace on November 17th 2011, 8:40 pm; edited 1 time in total
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: FORD Motor Sports A460 Heads
powerstrokeace October 5th 2011, 2:43 pm
deleted
Last edited by powerstrokeace on November 17th 2011, 8:40 pm; edited 1 time in total
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: FORD Motor Sports A460 Heads
powerstrokeace October 6th 2011, 2:56 pm
OK valves are steel 2.40 intake 1.94 exhaust. chamber's cc'ed at 68cc's flow starting at 500
500-341/260
600-375/271
700-400/280
800-402/282
He could not comment on weather there was a back cut do to just pretty much washing the oil off and going to the flow bench. He does recommend a valve job. Now the bad Which really isn't a problem but trying to be honest!
One exhaust bolt hole was welded on the out side and machined down and one other exhaust hole has a heli coil. The welded hole could have been a hair line crack OR these could have been repaired at TFS. I have no history on these heads.
Last with the chambers being this small its likely the intake was milled to match so I would now need to sell the intake with the heads. It is the old style FORD Motorsports. valve springs look to be K-motion and would work up to .850 lift. He didn't have time to check these, But if you have him do a valve job he will check all of them and give you a print out as well
So Heads as they sit $1800
Inatke---------------$300
Plus shipping from Colorado
Let me know
Ace
500-341/260
600-375/271
700-400/280
800-402/282
He could not comment on weather there was a back cut do to just pretty much washing the oil off and going to the flow bench. He does recommend a valve job. Now the bad Which really isn't a problem but trying to be honest!
One exhaust bolt hole was welded on the out side and machined down and one other exhaust hole has a heli coil. The welded hole could have been a hair line crack OR these could have been repaired at TFS. I have no history on these heads.
Last with the chambers being this small its likely the intake was milled to match so I would now need to sell the intake with the heads. It is the old style FORD Motorsports. valve springs look to be K-motion and would work up to .850 lift. He didn't have time to check these, But if you have him do a valve job he will check all of them and give you a print out as well
So Heads as they sit $1800
Inatke---------------$300
Plus shipping from Colorado
Let me know
Ace
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: FORD Motor Sports A460 Heads
bbf-falcon October 7th 2011, 9:14 pm
Greg is a very honest seller.We have done business a few times before, and always on the up/up.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: FORD Motor Sports A460 Heads
powerstrokeace October 8th 2011, 9:29 am
Rick
Thanks for the kind words but with the internet these days its very easy to bash people and that's something I don't care for or do.
Ace
aka
Greg Nicoletti
Thanks for the kind words but with the internet these days its very easy to bash people and that's something I don't care for or do.
Ace
aka
Greg Nicoletti
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Tennessee Bullitt- Posts : 582
Join date : 2009-08-25
Location : Ft Knox
Re: FORD Motor Sports A460 Heads
powerstrokeace October 9th 2011, 11:07 am
deleted
Last edited by powerstrokeace on November 17th 2011, 8:41 pm; edited 2 times in total
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
tennesse bullitt's out
powerstrokeace October 11th 2011, 3:59 pm
deleted
Last edited by powerstrokeace on November 17th 2011, 8:42 pm; edited 2 times in total (Reason for editing : update!!!!!!!!!)
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: FORD Motor Sports A460 Heads
powerstrokeace October 12th 2011, 7:44 pm
Deleted
Last edited by powerstrokeace on November 17th 2011, 8:42 pm; edited 1 time in total
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Moodyblues- Posts : 1168
Join date : 2009-08-19
Age : 64
Location : Jasper, TN -
Re: FORD Motor Sports A460 Heads
powerstrokeace October 16th 2011, 8:46 pm
deleted
Last edited by powerstrokeace on November 17th 2011, 8:43 pm; edited 1 time in total
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: FORD Motor Sports A460 Heads
powerstrokeace October 31st 2011, 10:57 am
deleted
Last edited by powerstrokeace on November 17th 2011, 8:43 pm; edited 1 time in total
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: FORD Motor Sports A460 Heads
powerstrokeace November 4th 2011, 9:44 pm
This will be the last bump and if they don't sell I'll keep these for another day
Ace
Ace
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum