Motor/trans combo for sale

I have a 466 c-6 combo for sale.It is in the 65 must. I bougtht a while back. Motor is in a later truck block it has stock crank and rods with good bolts,forged dish top pistons.It has a comp roller that is double pinned No specs but it is a small roller suspect it is a street grind. comp lifters and 3/8 push rods.TFS street heat heads crane gold rockers and crane stud girdle.Head studs look like arp brand.victor intake with a dommy top.Has motor sport alum valve covers.Has fresh synthetic oil in it.
DOES NOT COME WITH CARB DIST OR WATER PUMP.
Trans is a pretty fresh c-6 with approx 25 runs Has a shift kit but is not a manual valve body.shifts it's self up and normaly.Converter is a ptc stalls about 2500 on foot brake trans has a pan with cooling tubes that run all the way thru it.Also comes with a B&M shifter think it is a pro stick.I think? the one that is just like a Quater stick.comes with all hard wear and cable.can have the trans yolk as well
This mort /trans has no leaks with in reason I have no other specks as I did not build this.It ran consistant low 6.80's and high 6.70's when it cooled down a bit .It holds good oil pressure when hot it has no heating issues.It runs on pump gas and in my openion is a streetable combonation
This motor is in the car and running I have a glide set up for the car and want a stronger motor to go in this car is reason for selling.
price is $2500 for every thing.This is not a part out so no indv.pieces for sale,but I would consider seperating the trans from the motor
location Fayette Al 35555

What is with you guys and selling your motors with no water pump or dizzy? lol. I bought my T-bucket up in Haleyville which should be in your neck of the woods I believe. Anyway, I might be interested in your motor for my 56. Do you have a number I could call you?

thanks,
Jason

I just put a new elect one on it and see no reason to buy another on I do have the stock pump that came on the car you can have with it.
I think I know the guy you bought the other car from Was it on racing junk? You can call me @ 1-205-275-3031 Thanks Ward

I personally have seen and heard the engine and car.Sounded clean and crisp.Ward is a straight shooter too.No worries dealing with him.---RED

Thanks for the heads up Red. I talked to Blake as well and he said Ward was a stand-up guy too. I talked to Ward and I'm going to scoop it up and swap it into my 56.

Ward what size header do you have on that motor?

That should wake up the old ford Jason!! Sounds like a nice engine!!

Bill

Thanks Bill. I was thinking of getting Allen's motor but it is really more then I need. This is complete with tranny so I won't have to find a bunch pieces and parts other then a carb and dist. The price is right as well. Ward is probably gonna buy Allen's motor so hopefully it will work out for everybody.

Jason they are two inch OD headers look like they were made fro a U Weld type kit.
Red Thaks for the good word.
This shoud be a killer set up for a hot street set up.I would have like to have kept it for my 66 fairlane but didn't have the $$ to buy another motor for the race car with out selling this one.

Is this motor still avail? Thanks

Sold to Jason

Kevin I'll sell it to you for $3500.

Good purchase................... good deal for two good guys

SOLD funds arrived just as you said good to deal with you Jason.

dr's wife racing wrote:SOLD funds arrived just as you said good to deal with you Jason.

'')