466 carb to pan, fresh with spares
+4
bbf-falcon
new2460
maverick
prosandguy
8 posters
Page 1 of 1
466 carb to pan, fresh with spares
prosandguy October 30th 2012, 8:23 pm
My dad is selling the 466 he was going to put in his bronco before he sold it, this motor is complete from Pro Systems carb to Milodon oil pan.
D1ve block .060 with Scat stock stroke crank, Scat I beam rods and Probe flattop pistons. Cam is a custom solid flat tappet from Scott Johnston with his lifters with oiling mod also. Heads are DOVEs with minor port work on intake and exhaust from More Power in Sparta,MI stainless CJ size intake valves and exhaust valves with matching Motorsport G429 intake with 4150 pattern. Comp stainless body roller rocker arms and dual valve springs with Comp pushrods. Has a Melling HV oil pump, with Milodon rear sump pan and pickup.. Ford Motorsport timing set with bronze thrust washer and ARP oil pump drive. Comes with CSR electric water pump, MSD small cap dizzy and 1000cfm Pro Systems 4150. I believe it has a Scat SFI flexplate and Romac balancer also.
He has about 5 300ft passes on it since having the heads completely redone with new rocker arms, pushrods, springs and all new stainless valves. Always run with 20w50 Brad Penn oil, held 60lbs of pressure hot last time out.
Its a great motor, lots of power, he just isn't going to use it anytime soon, and he isn't getting any younger.
$3400 OBO
Also, spare short block. 472 with TRW dome pistons, CJ rods with ARP bolts, std crank, Comp 305s solid flat tappet cam, just block, crank, rods, pistons cam and lifters. Rebuilt a while ago, could use some rods and main bearings I'm sure.
$350 OBO
'90s vintage 460 complete EFI intake to truck oil pan, ran great, just kept it as a spare. 90K on it
$450 OBO
pm me here or sandguy356@gmail.com
D1ve block .060 with Scat stock stroke crank, Scat I beam rods and Probe flattop pistons. Cam is a custom solid flat tappet from Scott Johnston with his lifters with oiling mod also. Heads are DOVEs with minor port work on intake and exhaust from More Power in Sparta,MI stainless CJ size intake valves and exhaust valves with matching Motorsport G429 intake with 4150 pattern. Comp stainless body roller rocker arms and dual valve springs with Comp pushrods. Has a Melling HV oil pump, with Milodon rear sump pan and pickup.. Ford Motorsport timing set with bronze thrust washer and ARP oil pump drive. Comes with CSR electric water pump, MSD small cap dizzy and 1000cfm Pro Systems 4150. I believe it has a Scat SFI flexplate and Romac balancer also.
He has about 5 300ft passes on it since having the heads completely redone with new rocker arms, pushrods, springs and all new stainless valves. Always run with 20w50 Brad Penn oil, held 60lbs of pressure hot last time out.
Its a great motor, lots of power, he just isn't going to use it anytime soon, and he isn't getting any younger.
$3400 OBO
Also, spare short block. 472 with TRW dome pistons, CJ rods with ARP bolts, std crank, Comp 305s solid flat tappet cam, just block, crank, rods, pistons cam and lifters. Rebuilt a while ago, could use some rods and main bearings I'm sure.
$350 OBO
'90s vintage 460 complete EFI intake to truck oil pan, ran great, just kept it as a spare. 90K on it
$450 OBO
pm me here or sandguy356@gmail.com
prosandguy- Posts : 186
Join date : 2009-09-22
Age : 48
Location : Holland, MI
Re: 466 carb to pan, fresh with spares
prosandguy November 14th 2012, 10:06 pm
Sale pending on the 466
prosandguy- Posts : 186
Join date : 2009-09-22
Age : 48
Location : Holland, MI
Re: 466 carb to pan, fresh with spares
maverick November 15th 2012, 11:24 am
Somebody's gettin' a deal. 
maverick- BBF CONTRIBUTOR
- Posts : 3059
Join date : 2009-08-06
Age : 72
new2460- Posts : 195
Join date : 2009-11-18
prosandguy- Posts : 186
Join date : 2009-09-22
Age : 48
Location : Holland, MI
Re: 466 carb to pan, fresh with spares
bbf-falcon November 22nd 2012, 9:42 pm
'90s vintage 460 complete EFI intake to truck oil pan, ran great, just kept it as a spare. 90K on it
$450 OBO
I know a guy looking for this for a early 90's dually.
Can you post me your #,I will make sure he gets it.
$450 OBO
I know a guy looking for this for a early 90's dually.
Can you post me your #,I will make sure he gets it.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
new2460- Posts : 195
Join date : 2009-11-18
BM2271- Posts : 19
Join date : 2012-11-28
Location : LA
71 highboy- Posts : 3
Join date : 2012-12-04
Re: 466 carb to pan, fresh with spares
thunder74-79 December 27th 2012, 8:09 pm
is the 472 short block still for sale?
thunder74-79- Posts : 22
Join date : 2012-02-25
Age : 37
Location : Upper Illinois
472 short block
new2460 December 28th 2012, 2:03 am
Ive been trying to buy it for over a month now. Wont respond to pm's. Hope all is well
new2460- Posts : 195
Join date : 2009-11-18
Re: 466 carb to pan, fresh with spares
BM2271 December 28th 2012, 11:42 am
Same here on the 472. I thought my PMs werent working
BM2271- Posts : 19
Join date : 2012-11-28
Location : LA
71 highboy- Posts : 3
Join date : 2012-12-04
Re: 466 carb to pan, fresh with spares
Revnrandy December 28th 2012, 11:38 pm
Thought I had this bought at thanksgiving then never heard from him again sent many pms no reply
Revnrandy- Posts : 2
Join date : 2012-12-04
Similar topics» $450 Shipped in the US/Offer - Holley-1050-cfm-Dominator-Carb-Carburetor-L-9375-Fresh-Rebuild - SOLD
» Getting Rid of Some spares
» 532" With spares
» weiand carb adapter 4500 carb flange to 4150 intake
» bbf 473 fresh
» Getting Rid of Some spares
» 532" With spares
» weiand carb adapter 4500 carb flange to 4150 intake
» bbf 473 fresh
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|