Smblk Ford 409" stroker Windsor short block (Yes I know not a BBF)

Well since I'm cleaning the garage ......

Engine was built for the 2004 EMC competition with Dan Crower. Short block has approx 55-60 dyno pulls on it.
Was built with a set of AFR 225 heads  made 657hp at 6,500. Sold heads 5 years ago.


Engine block is SVO-Ford Racing W351 block.  9.5 deck , 4 bolt mains, siamesed bore, can be bored to 4.125”, has 351c mains 2.749”.  standard 4.00” bore

Rotating assembly:  custom  Scat 4340  with 4.065 stroke, smblk chevy rod  2.00” pin 6.00” length, Arias custom flat tops.  11.9: with AFR 225 heads  58cc chamber
Fox body Moroso oil pan

Robert Yates belt drive.
Engine includes custom Crower roller cam, and lifters.

Close to $4,000 in parts

Price:  $2,750 or OBO





somewhere I have the Meziere water pump for it

Where are you located.

"San Diego County .... East County"

^^^

Yes what he said. San Diego County


Jon

Jon, it'll save all some time, in the long run, if you go ahead and put your location on all of your adds.

got it.

Thanks

Engine front:





pump got scratched/nicked  in engine shipping crate:


San Diego County

Sold Aug 13, 2016

thanks Mike.


Jon

Thank you Jon.
It will have a good home in this car!!

Nice Mike,

Well depending on the heads and cam you pick you got the foundation for a strong 500-650hp engine.

That will work great in that car.

Thanks again.

If all goes well let me know if you "need" the 528 ?

Jon

Nice.