TFS A heads/1.85 Jesel Shafts
3 posters
Page 1 of 1
TFS A heads/1.85 Jesel Shafts
Ready to run, Comp pac alloy type springs 940lbs off the seat. SS valves.
Jesel 1.85 Shaft rockers / Rockers included
I will throw the head studs in.. ARP's.
10 bolt heads. Excellent flow, these are as good as any A head out there flow wise.
Ported by BJ's Cylinder Head Service and flowed by Charlie Evans
2.392 intake valve, 1.920 exhaust valve, non-tulip, without a pipe
.100=74/69
.200=153/140
.300=237/180
.400=311/224
.500=368/265
.600=416/296
.700=450/314
.800=463/327
ALL hardware bolt on ready.. $4400.00 OBO also will consider trades on other parts, MSD mags, Hemi blower intake,??
ALso have a set of Billet specialties Fab valve covers cost $550.00 with center vents welded in. Can run blow down tubes or whatever... $250.00 with the heads.
Jesel 1.85 Shaft rockers / Rockers included
I will throw the head studs in.. ARP's.
10 bolt heads. Excellent flow, these are as good as any A head out there flow wise.
Ported by BJ's Cylinder Head Service and flowed by Charlie Evans
2.392 intake valve, 1.920 exhaust valve, non-tulip, without a pipe
.100=74/69
.200=153/140
.300=237/180
.400=311/224
.500=368/265
.600=416/296
.700=450/314
.800=463/327
ALL hardware bolt on ready.. $4400.00 OBO also will consider trades on other parts, MSD mags, Hemi blower intake,??
ALso have a set of Billet specialties Fab valve covers cost $550.00 with center vents welded in. Can run blow down tubes or whatever... $250.00 with the heads.
Last edited by jsracing on January 29th 2010, 11:23 pm; edited 1 time in total
Re: TFS A heads/1.85 Jesel Shafts
Could you send those pictures to drag5732@msn.com. For some reason I can only see the top one. Also what is the chamber size and how much have been milled off? If they have.
Ace
Ace
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: TFS A heads/1.85 Jesel Shafts
I think the chamber size is 75 CC but Ill double check. Pretty sure they were only touched on the mill to insure they were true. ALSO these heads were NOT run. I have decided to try to scare up a set of hemi heads for the blower stuff.
Note sure why you cant see the pics?
try this link maybe?
pic album<<<---- LINK
Let me know if you still need the email.
Note sure why you cant see the pics?
try this link maybe?
pic album<<<---- LINK
Let me know if you still need the email.
Last edited by jsracing on January 29th 2010, 11:26 pm; edited 1 time in total
Re: TFS A heads/1.85 Jesel Shafts
OK they come up now.
Ace
Ace
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: TFS A heads/1.85 Jesel Shafts
would you take a set of TFSA heads on trade
nice heads triple springs
decent flow#s
they are older heads
pm me if you want flow#s
thease would be a good upgrade from my Aheads
thanxs
jesse
nice heads triple springs
decent flow#s
they are older heads
pm me if you want flow#s
thease would be a good upgrade from my Aheads
thanxs
jesse
jesse- Posts : 447
Join date : 2009-03-18
Age : 44
Location : little falls, mn
Re: TFS A heads/1.85 Jesel Shafts
jesse wrote:would you take a set of TFSA heads on trade
nice heads triple springs
decent flow#s
they are older heads
pm me if you want flow#s
thease would be a good upgrade from my Aheads
thanxs
jesse
He's upgrading to HEMI stuff
Ace
powerstrokeace- Posts : 1496
Join date : 2009-09-07
Location : colorado
Re: TFS A heads/1.85 Jesel Shafts
he said trades are welcome
i was thinking he might give me some credit for my current heads
to resell
it dosnt hurt to ask
i was thinking he might give me some credit for my current heads
to resell
it dosnt hurt to ask
jesse- Posts : 447
Join date : 2009-03-18
Age : 44
Location : little falls, mn
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|