Adjusting valves
3 posters
Page 1 of 1
Adjusting valves
1Bad91 October 14th 2010, 4:37 pm
About how many passes would you make before re-adjusting your valves?
1Bad91- Posts : 267
Join date : 2010-05-02
Age : 43
Location : Va Beach
Re: Adjusting valves
dfree383 October 14th 2010, 4:58 pm
I check them before every time at the track. The Don't necessaraly need adjusted, and its a good time to look everything over too.
dfree383- BBF CONTRIBUTOR
- Posts : 14792
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: Adjusting valves
bbf-falcon October 14th 2010, 8:10 pm
If I go to a 3 day race, I will go thru the valves at the shop,then I will go thru them again before I go out again. Usually after 2 or 3 single outings. Unless there is a problem,they are usually dead on. 
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Adjusting valves
1Bad91 October 14th 2010, 8:48 pm
I've had about 46 passes on my motor and have not gone through my valve clearances since. Got a big race this weekend and my gut is telling me to go through them before the event. Looks like I know what I'm doing 2morrow night..
1Bad91- Posts : 267
Join date : 2010-05-02
Age : 43
Location : Va Beach
Similar topics» Adjusting valves, EOIC method - how much room for error on IC?
» the dove c heads i bought , i measured the intake valves they were 2.250 assuming these are not stock valves ?
» 429 SCJ original ( used ) intake valves and NOS 2.19 PI valves - price lowered and shipping included!
» Adjusting Four Link
» rocker arm questions with solid lifters
» the dove c heads i bought , i measured the intake valves they were 2.250 assuming these are not stock valves ?
» 429 SCJ original ( used ) intake valves and NOS 2.19 PI valves - price lowered and shipping included!
» Adjusting Four Link
» rocker arm questions with solid lifters
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|