WTB BBF solid roller cam with 8-2 swap

Need some one to spec me out a cam for my combination. Solid roller with 8-2 swap for BBf with A460 heads. let me know if you can help. thx.

So out of over 600 users here, no one specs out and sell cams huh? Wow

when it come to cams im out in left feild or i would help. have you tryed lem or whats his name on here rmcomprandy or the mad porter?

this seems more like an engine tech question rather than something that would go in the for sale section. A few days of hard reading and research will get you the information you need to spec your own cam and then order a custom grind. Off the shelf sticks are fine and all but the REAL cams are the result of tons of research and number crunching.

check with LSM in Waterford , Mi. price might make you like the reg.firing order. custom cam on a custom core

I bought a LSM swap cam a few months ago. They are a good place to go and provide a superior product in a very short time. Price was in line.

PS Talk to Steve Lowe 248-674-4967

call Jay Freakin Allen at CI he says he is the best cam grinder in the world.... if you don't believe me just call and ask him he will tell you so.....



Randy

the Coug wrote:call Jay Freakin Allen at CI he says he is the best cam grinder in the world.... if you don't believe me just call and ask him he will tell you so.....



Randy

I heard Dave and Jay are "Close"

I believe I have found some one to get me a cam, but thx any way guys

the Coug wrote:call Jay Freakin Allen at CI he says he is the best cam grinder in the world.... if you don't believe me just call and ask him he will tell you so.....



Randy

I think I'm sensing sarcasm, Randy

the Coug wrote:call Jay Freakin Allen at CI he says he is the best cam grinder in the world.... if you don't believe me just call and ask him he will tell you so.....



Randy

Nevs wrote:

the Coug wrote:call Jay Freakin Allen at CI he says he is the best cam grinder in the world.... if you don't believe me just call and ask him he will tell you so.....



Randy

I think I'm sensing sarcasm, Randy

Just a tad Nev......


Randy

what was wrong with the cam that you had Charles ?

bruno wrote:what was wrong with the cam that you had Charles ?

at .899 lift I feel its a tad too big. even when you minus the lash .020 its at .879. I have the nextex springs that are good to .880 so that right at the limit. So im trying to take care of everything now before the final install of the motor.

I have a spare 60mm one but It's probably too big for you also.