TFS Heads Coming For My Build.

Well guys I am on a roll with my engine build, but I have some other news, I am going to join the Trick Flow crowd. I got some TFS heads on the way. Does anyone have some flow #'s on these? Curious how they compare with Kasse SCJ head.

Street heads? Ported?

you bought heads without knowing what they flow? either way, good luck!

i have a set of trick flow streets and would also be curious to see what they flow out of the box..

Yes the streets, No they are the out of the box. No I don't know what they flow out of the box, that is why I ask I figure they flow better than the D3's ported.

I guess it depends who ported them.............

This would be a great thread for you to read in regards to most of the BBF heads available, and where your TFS Streets stand in the order of things and in relation to your build:

https://www.429-460.com/proven-builds-f4/cylinder-head-info-gathered-by-djohagin-t122.htm?highlight=cylinder+head+pecking

This is the post in the above link dealing with TFS streets specifically:

https://www.429-460.com/proven-builds-f4/cylinder-head-info-gathered-by-djohagin-t122.htm#1274

Enjoy!

windsor the TFS streets run a heck of a lot better than they have a right to, TFS if the ports right and the truth of the matter is they build Dam good power... how many Other Production port and valve location heads build in access of 800 hp???? with a mild cam????


Randy

What happen to the TFS Mafia?

We're here, and we're in good shape, alive and kicking! You just asked an old question that's all. Please look through some of David O'Hagin's cylinder head flow threads, and you'll find TFS Street flow numbers out of the box. Welcome to the Street Mafia

Hope this helps,
Charlie

Blake sold his, KY went P-51, Coug is too busy buying summer lake houses..................I rekon I'm the only Mafia member still kickin' that ass with these pos street heads..........

richter69 wrote:Blake sold his, KY went P-51, Coug is too busy buying summer lake houses..................I rekon I'm the only Mafia member still kickin' that ass with these pos street heads..........

But, you are Fabio after all We would expect no less

To be adored by all............

richter69 wrote:To be adored by all............

All hail Fabio

And then ..some.................

the Coug wrote:windsor the TFS streets run a heck of a lot better than they have a right to, TFS if the ports right and the truth of the matter is they build Dam good power... how many Other Production port and valve location heads build in access of 800 hp???? with a mild cam????


Randy

No doubt! I was just trying to point him to where he can find some good info and how they relate to other heads

Oh, boy I am wraped up with Lem on setting my motor up. First things first I am getting my heads and some very good knowledge from him.

Tennessee Bullitt wrote:Oh, boy I am wraped up with Lem on setting my motor up. First things first I am getting my heads and some very good knowledge from him.

Can't go wrong there...

On a side note, THANKS for the donation to Chuck's build

not a problem, glad to help.

Well guys I found out some stuff about the bare heads from trick flow, I didn't pay attention to the machning you have to do so I just got off the phone with Lem and he sold me the complete Kasse SCJ heads. Sorry street mafia guys, I guess now I have a good reason to put the Jon Kasse name on my car.

Looks like the Fabio is all alone left holding the bag again, or is that hugging a nut or something.

No sweat off my balls, looks like I'll have the first street headed door car in the 8's soon.....

Sorry Fabio, Lem told me I could start up a SCJ mafia. TFS vs SCJ, if I am the only one in the SCJ I would say Fabio would walk all over me on the track.

schmitty wrote:Looks like the Fabio is all alone left holding the bag again, or is that hugging a nut or something.

Nah,

There's plenty of guys in the TFS Street Mafia. Some of them don't post very much at all, but we've got David Reynolds down in south Mississippi running 4.74s e.t. with them in his dragster. I think he picked up about (1.5 or 2 tenths over his ported Edelbrocks). Then of course we have the Coug, Jon, Nitro Lew, Joe Toney, Ken Herbert, Kris Kizer, Jerry Stanley, David Lynch, James Burns out of Texas, Dan Hobbs, Chuck Yager and the list goes on. Twenty-one guys by my count.

Uncle Charlie

Tennessee Bullitt wrote:Sorry Fabio, Lem told me I could start up a SCJ mafia. TFS vs SCJ, if I am the only one in the SCJ I would say Fabio would walk all over me on the track.

TB,

Welcome to the Super Cobra Jet family

"Our family" does not have to talk about SCJ's, our motors do all the talkin for us

Bruce