WTB 28 spline 9" posi carier

Anyone have a 28 spline o.e.m. LS or Locker carier for my 9" in my LTD? I'm looking for a take out (cheap) from some one upgrading to stronger stuff.

I've got a complete stock case setup w/3.70 LS.28 spline. Hadn't thought to much bout selling ,but guess i would. 

bbf-falcon wrote:I've got a complete stock case setup w/3.70 LS.28 spline. Hadn't thought to much bout selling ,but guess i would. 

Pm on its way

[quote="bowsher21"]Anyone have a 28 spline o.e.m. LS or Locker posi carier for my 9" in my LTD? I'm looking for a take out (cheap) from some one upgrading to stronger stuff. [/quot]
 
 
 
You want to put a chevy rearend in your car?  lol  POSI?
 
 
I have traction loc's   28 spline ,rebuilt or as is

bowsher21 wrote:

bbf-falcon wrote:I've got a complete stock case setup w/3.70 LS.28 spline. Hadn't thought to much bout selling ,but guess i would. 

Pm on its way

="bowsher21 /\ RICK is a good guy to buy from

I've just now have been going through my pile of 9" stuff and just pulled apart two cases:

28 spline trac loc with 2.891" bearings and shells, it had a new 6.2 ratio ring and pinion on it; 5 teeth on the pinion and 31 on the ring. Since it was assembled I'm ass-u-me-ing the trac loc was refreshed. Also have another used 6.2 ratio ring and pinion. The pigs sat around here for years and got dirty so all the parts should be cleaned.

28 spline Trac loc with bearings $100

New take out 6.2 ring and pinion, with 'regular' pinion bearing installed $100

Used 6.2 ring and pinion, with Daytona pinion bearing installed, same 5/31 teeth as above but different brand $75

Have pictures, can upload or send them. Prices don't include shipping which will be at actual cost. Not taking Paypal at these goodguy prices.

XEngr wrote:I've just now have been going through my pile of 9" stuff and just pulled apart two cases:

28 spline trac loc with 2.891" bearings and shells, it had a new 6.2 ratio ring and pinion on it; 5 teeth on the pinion and 31 on the ring.  Since it was assembled I'm ass-u-me-ing the trac loc was refreshed.  Also have another used 6.2 ratio ring and pinion.  The pigs sat around here for years and got dirty so all the parts should be cleaned.

28 spline Trac loc with bearings  $100

New take out 6.2 ring and pinion, with 'regular' pinion bearing installed  $100

Used 6.2 ring and pinion, with Daytona pinion bearing installed, same 5/31 teeth as above but different brand  $75

Have pictures, can upload or send them.  Prices don't include shipping which will be at actual cost.  Not taking Paypal at these goodguy prices.

Bingo on the 28 spline for $100, thats my got to have it price. Now I can check on shipping for it but you have to go to the blue bar above, select "Profile" and enter your location so people know where you are at.  Pm on it's way.

BOSS 429 wrote:

bowsher21 wrote:

bbf-falcon wrote:I've got a complete stock case setup w/3.70 LS.28 spline. Hadn't thought to much bout selling ,but guess i would. 

Pm on its way

="bowsher21   /\ RICK is a good guy to buy from

Thanks for the reference, I think his case & gear is assembly only, no part out.

Hopefully these pictures will shwo up: