BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Moroso oil pan #20614

Go down

Moroso oil pan #20614  Empty Moroso oil pan #20614

Post  powerstrokeace December 28th 2013, 7:01 pm

guy's looking to sell this oil pan and pick up as the kick out on the left side will not allow me to run my accusump. I'm looking for a replacement box style pan with built in windage tray with no kick out o the left side. I have not got the pan off the car as of yet and will not have it off till late Jan-Feb. i have 3 major projects and a very cold garage

SOLD

Ace


Last edited by powerstrokeace on April 12th 2014, 1:31 pm; edited 6 times in total
powerstrokeace
powerstrokeace

Posts : 1494
Join date : 2009-09-07
Location : colorado

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  Moodyblues December 29th 2013, 12:12 am

powerstrokeace wrote:guy's looking to sell this oil pan and pick up as the kick out on the left side will not allow me to run my accusump. I'm looking for a replacement box style pan like the Moroso 20616 with the with a oil scaper /louvered built in the pan

Ace

How much?
Moodyblues
Moodyblues

Posts : 1168
Join date : 2009-08-19
Age : 61
Location : Jasper, TN

http://www.russhoodinsurance.com

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  powerstrokeace March 13th 2014, 10:11 pm

new price as pan is off and pick up is provided as well. $250 + shipping. will need tab for pick up. it was removed for the Main stud gridle on this motor

Ace
powerstrokeace
powerstrokeace

Posts : 1494
Join date : 2009-09-07
Location : colorado

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  Mark Laczo March 14th 2014, 10:03 am

PM sent.
Mark Laczo
Mark Laczo

Posts : 274
Join date : 2009-08-06
Age : 53
Location : Rimbey, Alberta

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  powerstrokeace March 14th 2014, 11:59 am

PM sent Back.. Razz 

Ace
powerstrokeace
powerstrokeace

Posts : 1494
Join date : 2009-09-07
Location : colorado

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  powerstrokeace March 22nd 2014, 10:54 pm

After talking with Mark this pan from the factory came with a built in windage tray/screen. But it has been removed because this motor has a main stud gridle on it and needs the extra room to accommadate this. The bracket for the pump was remove as well. so it been reduced $100 and i adjusted the price

Ace
powerstrokeace
powerstrokeace

Posts : 1494
Join date : 2009-09-07
Location : colorado

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  racnrick March 23rd 2014, 12:08 am

Ace,

Does it still have the crank scraper in it that bolts to the side of the pan? If so I have a new Moroso screen for it (cheap) Very Happy don't need it anymore, but I don't have the crank scraper. You could make a new crank scraper for it, it is just a piece of sheet metal about 2" wide the length of the pan bent in the middle. Here is a link to the pan and in the 3rd picture you can see the screen and the crank scraper on the right side of the pan.

http://www.summitracing.com/parts/mor-20614?seid=srese1&gclid=CKfBuYPip70CFcWTfgodIwkA1A

racnrick

Posts : 462
Join date : 2008-12-03
Age : 64
Location : Puyallup, WA

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  powerstrokeace March 23rd 2014, 12:23 am

when looking at that picture the 3 tabs on the left in the lower pan are still there. However the 4 tabs on the right have been removed and are no longer there. I'm not a believer in the windage tray as of yet. the pan that i had repaired and put back on was ran with out a windage tray for a year and then i put the required tray in place and it made no difference ( I'm installing it back on with out a windae tray) that I could see from an ET or MPH stand point or oil sloshing from slowing down.

Ace
powerstrokeace
powerstrokeace

Posts : 1494
Join date : 2009-09-07
Location : colorado

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  powerstrokeace April 7th 2014, 11:29 pm

sale pending


Ace
powerstrokeace
powerstrokeace

Posts : 1494
Join date : 2009-09-07
Location : colorado

Back to top Go down

Moroso oil pan #20614  Empty Re: Moroso oil pan #20614

Post  powerstrokeace April 12th 2014, 1:30 pm

SOLD
powerstrokeace
powerstrokeace

Posts : 1494
Join date : 2009-09-07
Location : colorado

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum