New 557 build
2 posters
Page 1 of 1
New 557 build
I took my CJ engine out of my 71Convert street car and got a little carried away.
I am using a D1VE-6015-AA block, installing Milodon splayed caps and screw in core plugs, and 4.44 bore.
Lunati forged 4.5 crank, Callies compstar 6.7 rods, Probe dished pistons (10.6:1)
Kaase P51 heads, Lunati solid roller 254/264 @.05, .667, 110/106 CL, Comp pro magnum rockers.
The only bad part is that due to hood clearance I have to use a low profile intake, so I chose the Edlebrock airgap. Would much rather have a Victor but I just can't cut the hood.
Should be a nice cruiser
I am using a D1VE-6015-AA block, installing Milodon splayed caps and screw in core plugs, and 4.44 bore.
Lunati forged 4.5 crank, Callies compstar 6.7 rods, Probe dished pistons (10.6:1)
Kaase P51 heads, Lunati solid roller 254/264 @.05, .667, 110/106 CL, Comp pro magnum rockers.
The only bad part is that due to hood clearance I have to use a low profile intake, so I chose the Edlebrock airgap. Would much rather have a Victor but I just can't cut the hood.
Should be a nice cruiser
69BOSS- Posts : 75
Join date : 2014-01-20
Location : Seattle
Re: New 557 build
Use a Torker 2
dfree383- BBF CONTRIBUTOR
- Posts : 14792
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|