429 truck or bus crank
+4
dfree383
supervel45
BBFTorino
whitefield
8 posters
Page 1 of 1
429 truck or bus crank
Looking for a 429 bus or truck crank . I would prefer a virgin crank and one with in a 150 miles from me in Tennessee . Thanks
whitefield- Posts : 2244
Join date : 2009-08-23
Age : 56
Re: 429 truck or bus crank
What is a virgin 370/429 steel truck crank worth?? There is a complete truck in my local salvage yard, and Im thinkin of grabbing it.
BBFTorino- Posts : 998
Join date : 2015-12-31
Re: 429 truck or bus crank
I think the 370's were cast and the 429's are forged, so be careful.
supervel45- Posts : 4498
Join date : 2013-09-04
Re: 429 truck or bus crank
Yeah, I will know as soon as I pull the pan off. Thanks.
BBFTorino- Posts : 998
Join date : 2015-12-31
Re: 429 truck or bus crank
Yeah you need to watch what your grabbing, the steel stuff only came in some 429's
Whitefield what the hell you need one of those for? You'll find it a lot cheaper to but a scat or eagle forget crank
Whitefield what the hell you need one of those for? You'll find it a lot cheaper to but a scat or eagle forget crank
dfree383- BBF CONTRIBUTOR
- Posts : 14846
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: 429 truck or bus crank
http://www.nexttruckonline.com/search?category_level1=Engines+%7C+Mounts&category_level2=Engines&make=FORD&model=429&s-type=part Looks like the junk core engines are about $250, at least at this place.
supervel45- Posts : 4498
Join date : 2013-09-04
Re: 429 truck or bus crank
also need some 6.7 aluminum rods 2.2 and .990 ends
gmsmkr- Posts : 1364
Join date : 2014-06-22
Location : alabama
Re: 429 truck or bus crank
I have a few over here on the left coast, if it comes down to it. Call for details if seriously interested.
Re: 429 truck or bus crank
short stroke only comes in billet.dfree383 wrote:Yeah you need to watch what your grabbing, the steel stuff only came in some 429's
Whitefield what the hell you need one of those for? You'll find it a lot cheaper to but a scat or eagle forget crank
cool40- BBF CONTRIBUTOR
- Posts : 7313
Join date : 2009-08-31
Age : 53
Location : on the 1/8 mile dyno
Re: 429 truck or bus crank
.
Last edited by JBR-3 on February 22nd 2020, 2:36 am; edited 1 time in total (Reason for editing : .)
JBR-3- Posts : 266
Join date : 2009-08-17
Similar topics
» forged 3.85 crank
» differences in 68-69 crank pulley to 70 and up crank pulley for Lincoln with crank PS
» Red truck cab
» aluminum crank pulley and a crank trigger
» running a crank trigger setup from msd , i need a distributer now , i see the crank trigger one but says only for sheet metal intakes ???
» differences in 68-69 crank pulley to 70 and up crank pulley for Lincoln with crank PS
» Red truck cab
» aluminum crank pulley and a crank trigger
» running a crank trigger setup from msd , i need a distributer now , i see the crank trigger one but says only for sheet metal intakes ???
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|