BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

qfx,1250 and a Induction Solution sledge hammer plate kit

Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty qfx,1250 and a Induction Solution sledge hammer plate kit

Post  tconnection July 12th 2018, 10:47 pm

qfx,1250 and a Induction Solution sledge hammer plate kit  20180712
qfx,1250 and a Induction Solution sledge hammer plate kit  20180711
qfx,1250 and a Induction Solution sledge hammer plate kit  20180710
I have a qfx, 1250 that works great. And a used Induction Solution, sledge hammer plate kit with jets and chart. I never used it.
Both for $1400 plus shipping. I can text pic if interesting. I'm going alcohol amd
A 28 inch tire.
Thanks


Last edited by tconnection on August 5th 2018, 8:45 am; edited 4 times in total

tconnection

Posts : 859
Join date : 2009-02-17
Age : 55
Location : Alma, Ga

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty Re: qfx,1250 and a Induction Solution sledge hammer plate kit

Post  tconnection July 19th 2018, 10:12 am

Price reduced to $1,200 and right now i dont want to seperate but I may. These are clean active good parts.
Thanks


Last edited by tconnection on August 5th 2018, 8:55 am; edited 1 time in total

tconnection

Posts : 859
Join date : 2009-02-17
Age : 55
Location : Alma, Ga

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty 1250 Carb

Post  bigblokfoxs July 31st 2018, 10:27 am

A couple of questions-
Did you purchase the carb new and if so, what are the specs. of the engine that it was built for? How much run time or how many passes on it?

Thanks,
Greg C.

bigblokfoxs

Posts : 3
Join date : 2018-07-28

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty Re: qfx,1250 and a Induction Solution sledge hammer plate kit

Post  tconnection August 1st 2018, 1:51 pm

I didn't purchase either new but they were practically new. The carb works great. Idle bleed is 42, intermediate is 80 and high speed is 31, 130 needle seat. and has 96 jets in the front and back. I have 3 eighth mile passes on. It don't have many before hand either.  It's on my 580 a headed motor. It loves the TB.
Thanks

tconnection

Posts : 859
Join date : 2009-02-17
Age : 55
Location : Alma, Ga

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty Re: qfx,1250 and a Induction Solution sledge hammer plate kit

Post  tconnection August 6th 2018, 12:51 pm

Just added pics.

tconnection

Posts : 859
Join date : 2009-02-17
Age : 55
Location : Alma, Ga

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty carb

Post  hbstang August 7th 2018, 10:05 am

i would take the carb for $600 plus shipping if you will ship it.pm your contact info.
hbstang
hbstang

Posts : 200
Join date : 2012-10-29
Location : socal

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty Re: qfx,1250 and a Induction Solution sledge hammer plate kit

Post  tconnection August 7th 2018, 3:05 pm

hbstang you have a pm.
Thanks

tconnection

Posts : 859
Join date : 2009-02-17
Age : 55
Location : Alma, Ga

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty Re: qfx,1250 and a Induction Solution sledge hammer plate kit

Post  HELI-ARC August 11th 2018, 10:04 am

Sent you a PM
Thanks

HELI-ARC

Posts : 141
Join date : 2010-02-17

Back to top Go down

qfx,1250 and a Induction Solution sledge hammer plate kit  Empty Re: qfx,1250 and a Induction Solution sledge hammer plate kit

Post  tconnection August 11th 2018, 10:51 pm

hbstange, carb and cable bracket is boxed and ready.
Thanks

tconnection

Posts : 859
Join date : 2009-02-17
Age : 55
Location : Alma, Ga

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum