Stud Girdle Install advise needed.
2 posters
Page 1 of 1
Stud Girdle Install advise needed.
t-bird racer April 8th 2019, 9:51 am
I'm installing a set of Jomar Stud Girdles to my BBF 429CJ Edelbrock Aluminum heads.
Is there any tricks, tips, or trouble I should watch out for? I have no experience with these pieces.
Any help would be greatly appreciated.
Rich
Is there any tricks, tips, or trouble I should watch out for? I have no experience with these pieces.
Any help would be greatly appreciated.
Rich
t-bird racer- Posts : 191
Join date : 2010-01-10
Re: Stud Girdle Install advise needed.
jbozzelle April 8th 2019, 1:26 pm
Pretty easy and straight forward. Loosen the bolts enough to get the girdle over the nuts and slide it down far enough to clear the rockers at full lift and tighten down.
jbozzelle- Posts : 3698
Join date : 2009-08-10
Age : 48
Location : New Orleans
Similar topics» Mandrel Advise Needed
» Advise needed for my cheapskate 460
» Proceedure for checking valves clearance?
» ADVISE ON COMBO
» Longer main stud needed to mount oil pump pickup to.
» Advise needed for my cheapskate 460
» Proceedure for checking valves clearance?
» ADVISE ON COMBO
» Longer main stud needed to mount oil pump pickup to.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|