460 block to trans separation plate.
5 posters
Page 1 of 1
460 block to trans separation plate.
Are the auto and std trans plates the same? Thanks.
the tree man- Posts : 124
Join date : 2019-10-07
Age : 64
Location : Winnipeg,Canada
Re: 460 block to trans separation plate.
As I remember the automatic plate is smaller across the bottom than a standard plate.
Wayne (SAWDOFF) Pearce
Wayne (SAWDOFF) Pearce
Wayne Pearce- Posts : 658
Join date : 2009-08-19
Age : 81
Location : Greenfield Center, New York
Re: 460 block to trans separation plate.
It's been a while but I don't think standard has inspection plate for torque converter bolts.
stanger68- Posts : 498
Join date : 2015-12-05
Location : Birmingham, Al
Re: 460 block to trans separation plate.
My first 460 engine came with a C6 trans attached, I put a Richmond 5 speed behind it, and the C6 block plate didn't match up to the standard bell housing. I wound up fabricating my own plate using the bell housing as a template. It's been in there for the past 15 years with no problems.
Wayne (SAWDOFF) Pearce
Wayne (SAWDOFF) Pearce
Wayne Pearce- Posts : 658
Join date : 2009-08-19
Age : 81
Location : Greenfield Center, New York
Re: 460 block to trans separation plate.
Thanks. I'll look for an auto plate to be safe. I let mine go with the 460 when I sold it assuming guys would be tripping over those stupid things at the wreckers;however,can't find one locally. Must have all gone in the scrap bin over the years and off to the recyclers. Hate to buy a new one.
the tree man- Posts : 124
Join date : 2019-10-07
Age : 64
Location : Winnipeg,Canada
Re: 460 block to trans separation plate.
I have a few if you don’t come up with anything closer. Call me at the shop if interested.the tree man wrote:...I'll look for an auto plate to be safe...
Re: 460 block to trans separation plate.
Appreciate that. I have a couple irons in fire here but if those go down the flusher I'll take you up on the offer. Thanks again.
the tree man- Posts : 124
Join date : 2019-10-07
Age : 64
Location : Winnipeg,Canada
Re: 460 block to trans separation plate.
Finally lucked out on one from a friend but thanks anyway,Paul. On a side note,I've clicked on the link to your outfit many times as well as searching it off this site and it won't load. Page stays blank and doesn't open.
the tree man- Posts : 124
Join date : 2019-10-07
Age : 64
Location : Winnipeg,Canada
Re: 460 block to trans separation plate.
Paul's page works fine for me
res0rli9- BBF CONTRIBUTOR
- Posts : 3352
Join date : 2008-12-02
Age : 74
Location : sarasota FL.
Re: 460 block to trans separation plate.
Maybe because I'm north of he 49th? Even if I google it and click,does the same thing.No error page or equivalent. White screen and the wheel in the menu bar just keeps spinning. Odd and it's the only site that does that.
the tree man- Posts : 124
Join date : 2019-10-07
Age : 64
Location : Winnipeg,Canada
Similar topics
» 429/460 auto trans Block Plate/spacer
» Will a manual block plate from a 77 bronco fit a 71 429 thunderjet block?
» New Trans install with mid plate Help.
» Does adding a wave plate help the forward drum last after trans brake installation
» Instructions for cutting off the glide bellhousing and installing a JW bell...
» Will a manual block plate from a 77 bronco fit a 71 429 thunderjet block?
» New Trans install with mid plate Help.
» Does adding a wave plate help the forward drum last after trans brake installation
» Instructions for cutting off the glide bellhousing and installing a JW bell...
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum