victor jr bbf cj 460 heads 1500.00 obo and a comp cam 150.00!!!

1 set of victor jr. heads for a bbf part #61669 these heads are 2700.00 new
these are used and came off my 521 bbf. they have been check and are ready to go.
i have ran 5.72 on motor with a 1.24 60' @ 3000lbs on a 29.5 x 10.5 no w's
these heads 60' real hard in my car with the cam i have. comp cams .726 .726 lift

cam specs.
.726 in
.726 ex
dur.@0.50 in 268 ex 276
lob sep. is 108

call me @ 910 840 7226
150.00 for the cam
1500.00 for the heads obo.
plus the shipping!!!!
here is some vids of the heads at work!!! no nos!!! all motor, plus with a small carb 850 aed!!!!

The vids don't work.








Doug...

What kind of compression ratio does the motor have.

ok see if they work now i aint sure but i think that with a flat top its 10.5 to 1 no more than 11

That's impressive.

thanks, this was a good b/r motor i had the dial in a 5.80 a pile of time and have placed in the money in every race that i have been in.

1500.00 for the heads obo. must go

do these have the standard valve location?
wonder what these would do on a 557....

5.72 ET.
521ci
3000#
10.5 comp.
on motor
Hmmm

Maddmattmustangs wrote:do these have the standard valve location?
wonder what these would do on a 557....

Buy them and find out. They would be nice on a little 466 to start out with.

61649 are CJ 75cc chamber $2079 new @ Summit
60669 are standard port 95cc chamber $1819 new @ Summit

mark, hey u need click this link before u go posting a cost. they are 1,339.99 each plus shipping.
the part number is 61669!!!not 61649 or 60669

http://www.summitracing.com/search/?keyword=61669&dds=1

thanks , logan

bbf-falcon wrote:5.72 ET.
521ci
3000#
10.5 comp.
on motor
Hmmm

ummmm , is that a good reply or a i think ur full spit reply? lol

fastford600 wrote:mark, hey u need click this link before u go posting a cost. they are 1,339.99 each plus shipping.
the part number is 61669!!!not 61649 or 60669
http://www.summitracing.com/search/?keyword=61669&dds=1
thanks , logan

So is what the diff between the 61669 and the 61649 other than $300/head ,both list a single spring one .700 lift one 0.730 lift? I was just going by the new Summit catalog and it does not even list the 61699. Oh well my bad.

Later Mark

Thats a ooooooooh k reply or some might say, a Whatever

bbf-falcon wrote:Thats a ooooooooh k reply or some might say, a Whatever

Rick, what did you buy me yesterday?

(Accusump 3 qt.)accumulator,driving suit +shoes,Voltage gauge(Autometer),odds/end tools,Dial Bore gage,alot of odds and end stuff.

Mark Laczo wrote:

fastford600 wrote:mark, hey u need click this link before u go posting a cost. they are 1,339.99 each plus shipping.
the part number is 61669!!!not 61649 or 60669
http://www.summitracing.com/search/?keyword=61669&dds=1
thanks , logan

So is what the diff between the 61669 and the 61649 other than $300/head ,both list a single spring one .700 lift one 0.730 lift? I was just going by the new Summit catalog and it does not even list the 61699. Oh well my bad.

Later Mark

i dont know the diff. but they are good heads of for a stock loc port head. plus they are out the box no port work at all.

bbf-falcon wrote:(Accusump 3 qt.)accumulator,driving suit +shoes,Voltage gauge(Autometer),odds/end tools,Dial Bore gage,alot of odds and end stuff.

what kinda gauge did you get, what did you give for it?

138 wrote:

bbf-falcon wrote:(Accusump 3 qt.)accumulator,driving suit +shoes,Voltage gauge(Autometer),odds/end tools,Dial Bore gage,alot of odds and end stuff.

what kinda gauge did you get, what did you give for it?

O.K., but I don't know how to use a dial bore guage, don't need a accumulator, I cleaned mine today, but the rest of the stuff, I thank you for.

138 wrote:

bbf-falcon wrote:(Accusump 3 qt.)accumulator,driving suit +shoes,Voltage gauge(Autometer),odds/end tools,Dial Bore gage,alot of odds and end stuff.

what kinda gauge did you get, what did you give for it?

Autometer- $20

bbf-falcon wrote:

138 wrote:

bbf-falcon wrote:(Accusump 3 qt.)accumulator,driving suit +shoes,Voltage gauge(Autometer),odds/end tools,Dial Bore gage,alot of odds and end stuff.

what kinda gauge did you get, what did you give for it?

Autometer- $20

dial bore silly

email sent