BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Back On The Eternal Hemi Project

+13
KY JELLY
jbozzelle
schmitty
511Fox
jsracing
svted
DILLIGASDAVE
bruno
richter69
dfree383
Nevs
Lem Evans
TopSportsman916
17 posters

Page 1 of 2 1, 2  Next

Go down

Back On The Eternal Hemi Project Empty Back On The Eternal Hemi Project

Post  TopSportsman916 April 4th 2010, 6:38 pm

Well Rick came down last weekend & we got the 557 fired up in the dragster. Sure was nice to make some smoke & noise. It's been awhile since I have even picked up a wrench in the shop. Well we also got the hemi heads & intake bolted on to the block & put in the car. All I can say is that the car looks like it was made for the hemi...Actually it was. I told VPRC that I wanted the chassis to be able to hold a BBF Hemi.. Laughing My David Willingham engraved & powder coated valve covers just jump out at you. I think I will powder coat the motor plate black to match the valve covers. Anyway, I verified that the engine is way to tall to use the Ron's Terminators. I want to keep a cowl hood & right now the top of the throttle body is about 1.5" above the top of the cowl. So I definitely will be going to a hat set up. Hopefully I can have the hat sticking out just above the cowl hood. That's the game plan anyway.
[url=Back On The Eternal Hemi Project Hemiincar

[url=Back On The Eternal Hemi Project Hemiincar2

Headers look to have plenty of room. #8 tube is the only one that is going to be tight with the steering shaft. The Sykes Bros. did a nice job fitting up the stub tubes to my Mike Balf flanges.
Back On The Eternal Hemi Project Hemistubtubesleft

Here is the first new part I have bought in awhile. I said I would never spend the money on merge collectors. Well never say never. Summit Pro Shop had a pretty good price on the Dynatech merge collectors. Plus I had two Summit gift cards from Christmas... Very Happy
Back On The Eternal Hemi Project Mergecollector2
TopSportsman916
TopSportsman916

Posts : 36
Join date : 2009-08-09
Age : 57
Location : NC

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  Lem Evans April 4th 2010, 6:50 pm

Fancy Exclamation
Cool

Lem Evans

Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky

http://bfevansraceparts.com

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  Nevs April 4th 2010, 7:43 pm

Looks good, Chris. Thanks for the updates! Cool
Nevs
Nevs
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 2724
Join date : 2009-02-07
Age : 70
Location : NW Iowa(Odebolt)

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  dfree383 April 4th 2010, 7:48 pm

Fire that bad mofo !!!
dfree383
dfree383
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 14853
Join date : 2009-07-09
Location : Home Wif Da Wife.....

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  richter69 April 4th 2010, 9:01 pm

Looks good Chris!!!!!


Nice talk today.............. Cool
richter69
richter69

Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  bruno April 4th 2010, 9:57 pm

Looks great Chris .... you guys going try and make it to the bash this year ?

_________________
coming soon x275 build .........
thanks to all my sponsors :

www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno
bruno
Moderator
Moderator

Posts : 10877
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL.

http://WWW.CKRME.COM

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  DILLIGASDAVE April 5th 2010, 6:15 am

Looks like it's going to be a damn nice setup. Twisted Evil
DILLIGASDAVE
DILLIGASDAVE

Posts : 2262
Join date : 2009-08-08
Location : Texas. pronounced "texASS"

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  svted April 5th 2010, 10:47 pm

Chris, lookin real good. Ed
svted
svted

Posts : 42
Join date : 2009-08-12
Age : 69
Location : S.W. Michigan

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  jsracing April 6th 2010, 12:59 am

Nice Chris!

Love all those hemi parts!

Who's valve covers where they originallly? Carols?

JS

jsracing

Posts : 378
Join date : 2009-06-27
Location : Indy 2 miles from the US nationals

http://indyracingscene.com/?styleid=2

Back to top Go down

Back On The Eternal Hemi Project Empty Kool Kool

Post  511Fox April 6th 2010, 4:36 pm

I love that Hemi Exclamation

511Fox

Posts : 251
Join date : 2010-02-20
Age : 53
Location : Near Mansfield/Norwalk Ohio

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  schmitty April 6th 2010, 6:20 pm

Love the engine porn. Laughing
schmitty
schmitty

Posts : 4538
Join date : 2008-12-02
Age : 54
Location : Holdrege, NE

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  TopSportsman916 April 7th 2010, 7:52 pm

Thanks guys!! I'm glad I could help out your engine porn addiction.. Laughing I'm just ready to have everything to start putting this beast together. I am tired of buying parts!!! Hopefully sometime soon I can get to Mike Balf Race Cars & get him going on the headers. Very Happy

Special thanks to Dave Freelander for coming up with the "Eternal Hemi" name for my project. If I don't hurry up & finish it soon, I will be retired & won't be able to afford to run it. And I am only 43!!! Laughing Laughing
TopSportsman916
TopSportsman916

Posts : 36
Join date : 2009-08-09
Age : 57
Location : NC

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  Nevs April 7th 2010, 8:05 pm

TopSportsman916 wrote:Thanks guys!! I'm glad I could help out your engine porn addiction.. Laughing I'm just ready to have everything to start putting this beast together. I am tired of buying parts!!! Hopefully sometime soon I can get to Mike Balf Race Cars & get him going on the headers. Very Happy

Special thanks to Dave Freelander for coming up with the "Eternal Hemi" name for my project. If I don't hurry up & finish it soon, I will be retired & won't be able to afford to run it. And I am only 43!!! Laughing Laughing

At least you are only 43 Chris. Could be worse, you could be in my shoes...... Laughing Laughing
Nevs
Nevs
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 2724
Join date : 2009-02-07
Age : 70
Location : NW Iowa(Odebolt)

Back to top Go down

Back On The Eternal Hemi Project Empty Ahead

Post  511Fox April 8th 2010, 5:17 pm

You're ahead of me I am still planning & saving. Embarassed Mad Crying or Very sad Sad

511Fox

Posts : 251
Join date : 2010-02-20
Age : 53
Location : Near Mansfield/Norwalk Ohio

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  TopSportsman916 April 8th 2010, 5:54 pm

511Fox wrote:You're ahead of me I am still planning & saving. Embarassed Mad Crying or Very sad Sad

Don't feel bad. I see that you are 38. I was 38 when I started this project... Very Happy
TopSportsman916
TopSportsman916

Posts : 36
Join date : 2009-08-09
Age : 57
Location : NC

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  jbozzelle April 8th 2010, 8:44 pm

TopSportsman916 wrote:
511Fox wrote:You're ahead of me I am still planning & saving. Embarassed Mad Crying or Very sad Sad

Don't feel bad. I see that you are 38. I was 38 when I started this project... Very Happy


And he ain't lying about that!!! Shocked Shocked

Glad to see you are making progress Chris. Make sure to keep it fancy...

jbozzelle

Posts : 3708
Join date : 2009-08-10
Age : 50
Location : New Orleans

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  KY JELLY April 8th 2010, 10:09 pm

looks good Fancy PANTS lol! Have to start callin you "Fancy Man with THA HAT " lol!
KY JELLY
KY JELLY

Posts : 1530
Join date : 2008-12-03

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  IDT-572 April 8th 2010, 10:11 pm

It really looks nice Chris.............. Wink I 'm proud for you. Make sure to keep us posted everytime you do something. Cool
IDT-572
IDT-572
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 4628
Join date : 2008-12-02
Age : 63
Location : Shelbyville Tn.

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  jmayabb April 13th 2010, 9:28 am

Looking good Chris. Take your time and do it right the first time. No need to rush now.
jmayabb
jmayabb

Posts : 151
Join date : 2009-08-07

http://www.joesraceparts.com

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  Tony M April 13th 2010, 10:17 am

I wish I had a Hemi ! Sad Looks awsome !
Tony M
Tony M

Posts : 479
Join date : 2010-01-17
Age : 54
Location : North Jersey

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  TopSportsman916 April 13th 2010, 7:41 pm

Joe, only thing I can do is take my time... I don't have the money to rush !!! Rolling Eyes Laughing I talked to Mike Balf @ Mike Balf Race Cars in Va. Beach, Va. this weekend. Hope to get the car in his shop in the next couple of weeks & have him fabricate the headers. Very Happy

Joe , how is the Big Daddy Hemi doing? I hope it is doing well since I can't seem to finish Jr. Laughing
TopSportsman916
TopSportsman916

Posts : 36
Join date : 2009-08-09
Age : 57
Location : NC

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  jsracing April 13th 2010, 10:26 pm

Chris,
I talked to carol yesterday, he is supposed to be stress releiving my block and giving the heads his valve ,chamber job this week. I also got him to order me a valasco crank... he talked me into it somewhow Shocked

Ill be in the poor house when this motor is done! Sad

jsracing

Posts : 378
Join date : 2009-06-27
Location : Indy 2 miles from the US nationals

http://indyracingscene.com/?styleid=2

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  TopSportsman916 April 13th 2010, 10:37 pm

jsracing wrote:Chris,
I talked to carol yesterday, he is supposed to be stress releiving my block and giving the heads his valve ,chamber job this week. I also got him to order me a valasco crank... he talked me into it somewhow Shocked

Ill be in the poor house when this motor is done! Sad

It's amazing how we can be talked into such things... Rolling Eyes Laughing Laughing

Jerry, are you building a hemi now or sticking with the A460 heads ? ( If you've told me before, I appollogize) Whichever it is it, is going to be one bad hombre. Can you say Jerry's Pro Mod???? Very Happy
TopSportsman916
TopSportsman916

Posts : 36
Join date : 2009-08-09
Age : 57
Location : NC

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  jsracing April 14th 2010, 12:12 am

not quite a pro mod Chris, I cant afford to run with those screw blower guys. it will have hemi heads, I sold the A 460 heads. I bought a soild no water 10.5 deck block and some C and C Motorsports solid heads.

we havent decided on the cid yet. Ill have that gear drive block.

jsracing

Posts : 378
Join date : 2009-06-27
Location : Indy 2 miles from the US nationals

http://indyracingscene.com/?styleid=2

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  IDT-572 April 14th 2010, 11:51 am

jsracing wrote:not quite a pro mod Chris, I cant afford to run with those screw blower guys. it will have hemi heads, I sold the A 460 heads. I bought a soild no water 10.5 deck block and some C and C Motorsports solid heads.

we havent decided on the cid yet. Ill have that gear drive block.

Sorry to high jack your thread Chris...............

I enjoyed doing business with you Jerry,

Thanks................
IDT-572
IDT-572
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 4628
Join date : 2008-12-02
Age : 63
Location : Shelbyville Tn.

Back to top Go down

Back On The Eternal Hemi Project Empty Re: Back On The Eternal Hemi Project

Post  Sponsored content


Sponsored content


Back to top Go down

Page 1 of 2 1, 2  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum